MAX9062EBS+TG45
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-WFBGA, CSPBGA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | TIN SILVER COPPER |
| Subcategory | Comparators |
| Technology | BICMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MAX9062 |
| Pin Count | 4 |
| Output Type | Open Drain |
| Number of Elements | 1 |
| Power Supplies | 3.3V |
| Max Supply Current | 600nA |
| Propagation Delay | 15 μs |
| Quiescent Current | 1.1μA |
| Common Mode Rejection Ratio | 53 dB |
| Voltage - Supply, Single/Dual (±) | 1V~5.5V |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 60pA |
| Current - Quiescent (Max) | 1.1μA |
| Current - Input Bias (Max) | 60pA @ 3.3V |
| Hysteresis | ±12mV |
| CMRR, PSRR (Typ) | 53dB PSRR |
| Height Seated (Max) | 0.67mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX9062EBS+TG45 Overview
A convenient transport package is provided in 4-WFBGA, CSPBGA .The comparator has a Open Drain output.The part will be shipped by Tape & Reel (TR) .The comparator has 4 terminals.The electrical component here belongs to the Comparators family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 3.3V .The type of the chip can be classified as with Voltage Reference .In total, it contains 1 elements.There are 4 pins on this board.The recommended mounting method is Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.The comparator has 4 pins.You can search MAX9062 if you are looking for more pin-to-pin solutions.There is a quiescent current of 1.1μA in this comparator.The PCB or other board has a Surface Mount for mounting.If the current supply exceeds 600nA , the comparator might be damaged.A power supply of 3.3V is sufficient for the operation of the device.
MAX9062EBS+TG45 Features
Open Drain output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.1μA
MAX9062EBS+TG45 Applications
There are a lot of Maxim Integrated MAX9062EBS+TG45 linear comparators applications.
- Mobile Phones and Tablets
- Metering Systems
- Point of load regulators
- Power Supervision
- Zero-Crossing Detectors
- Laptop Computers
- Self-diagnostics
- Industrial
- Factory automation & control
- Lithium ion battery monitoring
