MAX9064EBS+TG45
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 4-WFBGA, CSPBGA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Subcategory | Comparator |
| Max Power Dissipation | 312mW |
| Technology | BICMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Base Part Number | MAX9064 |
| Output Type | Push-Pull |
| Number of Elements | 1 |
| Power Supplies | 3.3V |
| Nominal Supply Current | 600nA |
| Max Supply Current | 600nA |
| Propagation Delay | 15 μs |
| Quiescent Current | 1.1μA |
| Turn On Delay Time | 15 μs |
| Response Time | 15000 ns |
| Common Mode Rejection Ratio | 53 dB |
| Voltage - Supply, Single/Dual (±) | 1V~5.5V |
| Input Offset Voltage (Vos) | 6mV |
| Power Supply Rejection Ratio (PSRR) | 53dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 60pA |
| Input Bias Current | 60pA |
| Current - Quiescent (Max) | 1.1μA |
| Current - Input Bias (Max) | 60pA @ 3.3V |
| Hysteresis | ±12mV |
| CMRR, PSRR (Typ) | 53dB PSRR |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX9064EBS+TG45 Overview
The product is packaged in 4-WFBGA, CSPBGA in order to facilitate transportation.There is a Push-Pull output type for this comparator.As a result, it is designed with Tape & Reel (TR) package.As you can see, the comparator has4 terminals.The chip belongs to Comparator .Supplied by 3.3V voltage, the comparator can accomplish the many demanding tasks.Electronic comparator can be classified as a with Voltage Reference chip.The total number of elements is 1 .In general, mounting type Surface Mount is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.Electronic comparator has 4 pins.You can search MAX9064 if you are looking for more pin-to-pin solutions.There is 1.1μA current flowing in this comparator.The PCB or other board can be mounted using the Surface Mount on it.For normal use of the device, the nominal supply current should be 600nA .A current supply greater than 600nA may result in the comparator malfunctioning.A power supply of 3.3V is sufficient for the operation of the device.A maximum current of 60pA can be supplied to the device.
MAX9064EBS+TG45 Features
Push-Pull output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.1μA
MAX9064EBS+TG45 Applications
There are a lot of Maxim Integrated MAX9064EBS+TG45 linear comparators applications.
- Zero-Crossing Detectors
- Body Control Modules
- Metering Systems
- Handheld Instruments
- Threshold Detectors
- Wireless Base Stations
- High-Speed Differential Line Receiver
- Infotainment and Clusters
- System control and monitoring
- Building automation
