MAX9075EUK+T
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 571mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9075 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 5.2μA |
| Max Supply Current | 5.2μA |
| Propagation Delay | 580 ns |
| Quiescent Current | 6.6μA |
| Response Time | 580 ns |
| Common Mode Rejection Ratio | 77 dB |
| Voltage - Supply, Single/Dual (±) | 2.1V~5.5V |
| Input Offset Voltage (Vos) | 1mV |
| Average Bias Current-Max (IIB) | 0.02μA |
| Power Supply Rejection Ratio (PSRR) | 77dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 5nA |
| Input Bias Current | 5nA |
| Current - Quiescent (Max) | 6.6μA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 0.005μA @ 5V |
| CMRR, PSRR (Typ) | 82dB CMRR, 77dB PSRR |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
MAX9075EUK+T Overview
The product is packaged in SC-74A, SOT-753 to facilitate transportation.The comparator has a CMOS, Push-Pull, Rail-to-Rail, TTL output.This device is designed in Tape & Reel (TR) case.The comparator has a total of 5 terminals.The electrical component in this case belongs to the Comparator families.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.Speaking of types, this is a typical General Purpose comparator.There are a total of 1 elements in it.As a result, it contains 5 pins.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.5 pins are available on the comparator.You may wish to search MAX9075 for more solutions that address your specific needs.In this comparator, the quiescent current is 6.6μA .A Surface Mount is provided for mounting it onto a PCB or another board.For normal use of the device, the nominal supply current should be 5.2μA .Current supply exceeding 5.2μA could cause disfunction of the compartator.You can input a maximum current of 5nA into this device.
MAX9075EUK+T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 6.6μA
MAX9075EUK+T Applications
There are a lot of Maxim Integrated MAX9075EUK+T linear comparators applications.
- Automatic Test Equipment
- Infotainment & cluster
- Mobile Phones and Tablets
- Automotive
- Laptop Computers
- General-Purpose Portable Devices
- Portable and Battery-Powered Systems
- Alarm and Monitoring Circuits
- Set Top Boxes
- Wireless Base Stations
