Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-8 |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2013 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Subcategory |
Comparator |
Max Power Dissipation |
471mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
MAX9077 |
Pin Count |
8 |
Output Type |
CMOS, Push-Pull, Rail-to-Rail, TTL |
Number of Elements |
2 |
Nominal Supply Current |
6.6μA |
Max Supply Current |
6.6μA |
Propagation Delay |
580 ns |
Quiescent Current |
6.6μA |
Response Time |
580 ns |
Common Mode Rejection Ratio |
77 dB |
Voltage - Supply, Single/Dual (±) |
2.1V~5.5V |
Input Offset Voltage (Vos) |
1mV |
Power Supply Rejection Ratio (PSRR) |
77dB |
Supply Voltage Limit-Max |
6V |
Max Input Current |
5nA |
Input Bias Current |
-20nA |
Voltage - Input Offset (Max) |
1mV @ 5V |
Current - Input Bias (Max) |
0.005μA @ 5V |
CMRR, PSRR (Typ) |
82dB CMRR, 77dB PSRR |
Height Seated (Max) |
1.45mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX9077EKA+T Overview
For convenience, it is packaged in SOT-23-8 .This comparator is of the CMOS, Push-Pull, Rail-to-Rail, TTL output type.This chip is designed with the Tape & Reel (TR) package.8 terminals are found on the comparator.The component belongs to the Comparator family of electrical components.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .In total, it contains 2 elements.The board includes 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.There are 8 pins on the comparator.You can find more pin-to-pin solutions by searching MAX9077 .The comparator presents a quiescent current of 6.6μA volts.A Surface Mount is provided for mounting it onto a PCB or another board.Normally, the nominal supply current should be 6.6μA .The compartator could be damaged if the current supply exceeds 6.6μA .Input current to the device cannot exceed 5nA .
MAX9077EKA+T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 6.6μA
MAX9077EKA+T Applications
There are a lot of Maxim Integrated MAX9077EKA+T linear comparators applications.
- Pulse, Squarewave, and Time Delay Generators
- Alarm and Monitoring Circuits
- Appliances
- Ultra-Low Power Systems
- Point of load regulators
- RC Timers
- Power Supervision
- Wireless Base Stations
- Set Top Boxes
- Building automation