MAX9077ESA+T
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX9077 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 6.6μA |
| Max Supply Current | 6.6μA |
| Propagation Delay | 580 ns |
| Quiescent Current | 6.6μA |
| Response Time | 580 ns |
| Common Mode Rejection Ratio | 77 dB |
| Voltage - Supply, Single/Dual (±) | 2.1V~5.5V |
| Input Offset Voltage (Vos) | 1mV |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | -20nA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 0.005μA @ 5V |
| CMRR, PSRR (Typ) | 82dB CMRR, 77dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 471mW |
MAX9077ESA+T Overview
For convenience, it is packaged in 8-SOIC (0.154, 3.90mm Width) .The comparator has a type CMOS, Push-Pull, Rail-to-Rail, TTL output.This device is designed in Tape & Reel (TR) case.As you can see, the comparator has8 terminals.Electronic comparator is a part of Comparator family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.Speaking of types, this is a typical General Purpose comparator.There are a total of 2 elements in it.As a result, it contains 8 pins.In general, mounting type Surface Mount is recommended.As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.8 pins are present on the comparator.If you require more pin-to-pin solutions, search MAX9077 for more options.The comparator presents a quiescent current of 6.6μA volts.This component has a Surface Mount mount for mounting to PCBs or other boards.Normal operation of the device requires 6.6μA supply current.Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 6.6μA .
MAX9077ESA+T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 6.6μA
MAX9077ESA+T Applications
There are a lot of Maxim Integrated MAX9077ESA+T linear comparators applications.
- Zero-Crossing Detectors
- Security Detection Systems
- Handheld Instruments
- Factory automation & control
- Battery-Powered Electronics
- Consumer Medical Electronics
- Infotainment and Clusters
- High-Speed Differential Line Receiver
- Mobile Phones
- Ultra-Low Power Systems
