MAX9077EUA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 471mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX9077 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 6.6μA |
| Max Supply Current | 6.6μA |
| Propagation Delay | 580 ns |
| Quiescent Current | 6.6μA |
| Response Time | 580 ns |
| Common Mode Rejection Ratio | 77 dB |
| Voltage - Supply, Single/Dual (±) | 2.1V~5.5V |
| Input Offset Voltage (Vos) | 1mV |
| Power Supply Rejection Ratio (PSRR) | 77dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 5nA |
| Input Bias Current | 5nA |
| Voltage - Input Offset (Max) | 1mV @ 5V |
| Current - Input Bias (Max) | 0.005μA @ 5V |
| CMRR, PSRR (Typ) | 82dB CMRR, 77dB PSRR |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9077EUA+T Overview
In order to facilitate transportation, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .The comparator has a type CMOS, Push-Pull, Rail-to-Rail, TTL output.The chip is packaged with Tape & Reel (TR) .You can find 8 terminals of the comparator.Electronic comparator is a part of Comparator family.Supplied by 5V voltage, the comparator can accomplish the many demanding tasks.The type of the chip can be classified as General Purpose .There are a total of 2 elements in it.Electronic comparator includes 8 pins.A Surface Mount mounting type is recommended.To ensure proper functioning, the operating temperature should be set to -40°C~85°C .The comparator has 8 pins.Search MAX9077 to find more pin-to-pin solutions.In this comparator, the quiescent current is 6.6μA .A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current of the device be 6.6μA .The compartator could be damaged if the current supply exceeds 6.6μA .Electronic comparator is possible to input a maximum current of 5nA into the device.
MAX9077EUA+T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 6.6μA
MAX9077EUA+T Applications
There are a lot of Maxim Integrated MAX9077EUA+T linear comparators applications.
- General-Purpose Portable Devices
- Infotainment and Clusters
- Wide Range VCO; MOS Clock Timers
- Automotive
- Zero-Crossing Detectors
- Current and voltage sensing
- General-Purpose, Low-Voltage Applications
- Limit Comparators
- Power management
- Notebooks and PDAs
