MAX907CPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 727mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX907 |
| Pin Count | 8 |
| Output Type | TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Max Supply Current | 1mA |
| Propagation Delay | 50 ns |
| Quiescent Current | 1mA |
| Turn On Delay Time | 40 ns |
| Response Time | 45 ns |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 4.5V~11V |
| Input Offset Voltage (Vos) | 2mV |
| Average Bias Current-Max (IIB) | 0.5μA |
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 300nA |
| Input Bias Current | 300nA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.3μA @ 5V |
| CMRR, PSRR (Typ) | 86.02dB CMRR, 86.02dB PSRR |
| Length | 9.375mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX907CPA+ Overview
In order to make transportation easier, it is packaged in 8-DIP (0.300, 7.62mm) .The comparator has a type TTL output.We ship the part through Tube .The device is designed with 8 terminations.Other Comparator like the device play a important role in the industry.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.Electronic comparator can be classified as a General Purpose chip.There are a total of 2 elements in it.Electronic comparator has 8 pins.Electronic comparator is recommended that you mount the device using type Through Hole .In order to avoid malfunctions, the operating temperature should be set to 0°C~70°C .The comparator is equipped with 8 pins.Try search MAX907 to get more pin-to-pin solutions for your special needs.A quiescent current of 1mA is displayed by this comparator.There is a Through Hole on the board for mounting to a PCB or other board.Normal operation of the device requires a nominal supply current of 1mA .An excess of current supply over 1mA could result in malfunction of the comparator.This device requires 5V power supplies to operate.Input current to the device is limited to 300nA .
MAX907CPA+ Features
TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 1mA
MAX907CPA+ Applications
There are a lot of Maxim Integrated MAX907CPA+ linear comparators applications.
- Window Comparators
- Building automation
- Point of load regulators
- Consumer Medical Electronics
- Metering Systems
- Portable Battery Monitoring
- Battery management and protection
- Body Control Modules
- Automatic Test Equipment
- Threshold Detectors
