MAX907CSA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 471mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX907 |
| Pin Count | 8 |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 2 |
| Nominal Supply Current | 1mA |
| Power Dissipation | 471mW |
| Max Supply Current | 1mA |
| Propagation Delay | 50 ns |
| Quiescent Current | 1mA |
| Turn On Delay Time | 40 ns |
| Response Time | 45 ns |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 4.5V~11V |
| Input Offset Voltage (Vos) | 2mV |
| Average Bias Current-Max (IIB) | 0.5μA |
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 300nA |
| Input Bias Current | 300nA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.3μA @ 5V |
| CMRR, PSRR (Typ) | 86.02dB CMRR, 86.02dB PSRR |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX907CSA+ Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .This comparator is of the TTL output type.The part is shipped by Tube .The comparator has a total of 8 terminals.The component belongs to the Comparator family of electrical components.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.In terms of type, this is a typical General Purpose comparator.There are 8 pins on this board.The recommended mounting method is Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.8 pins are present on the comparator.Search MAX907 to find more pin-to-pin solutions.In this comparator, the quiescent current is 1mA .The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 1mA when using the device.A supply current exceeding 1mA may result in the comparator malfunctioning.In order to run the device, there are only 5V power supplies required.Electronic comparator is possible to input a maximum of 300nA current into the device.Comparator electronics is necessary to have an operating supply voltage of 5V for normal operation.
MAX907CSA+ Features
TTL output capability
General Purpose IC
Operates under 0°C~70°C
Quiescent Current: 1mA
MAX907CSA+ Applications
There are a lot of Maxim Integrated MAX907CSA+ linear comparators applications.
- Motor drives
- Wireless Base Stations
- Factory automation & control
- General-Purpose, Low-Voltage Applications
- Window Comparators, Multivibrators
- Zero-Crossing Detectors
- Hand-Held Electronics
- Zero-Crossing Detectors
- Building automation
- Mobile Phones and Tablets
