MAX907CSA+T
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 471mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX907 |
| Pin Count | 8 |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Max Supply Current | 1mA |
| Propagation Delay | 40 ns |
| Quiescent Current | 1mA |
| Response Time | 45 ns |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 4.5V~11V |
| Input Offset Voltage (Vos) | 2mV |
| Average Bias Current-Max (IIB) | 0.5μA |
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 300nA |
| Input Bias Current | 300nA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.3μA @ 5V |
| CMRR, PSRR (Typ) | 86.02dB CMRR, 86.02dB PSRR |
| Propagation Delay (Max) | 50ns |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX907CSA+T Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) for ease of transportation.This comparator is of the TTL output type.This package has been designed with Tape & Reel (TR) .There are8 terminals on the comparator.The component belongs to the Comparator family of electrical components.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .Electronic comparator can be classified as a General Purpose chip.This element consists of 2 elements in total.Electronic comparator includes 8 pins.The type of mounting recommended is Surface Mount .Ideally, the operating temperature should be set at 0°C~70°C in order to prevent malfunction.The comparator is equipped with 8 pins.You can search MAX907 if you are looking for more pin-to-pin solutions.This comparator presents a quiescent current of 1mA .A Surface Mount is provided for mounting it onto a PCB or another board.Normally, the nominal supply current should be 1mA .A supply current exceeding 1mA may result in the comparator malfunctioning.In order to run the device, there are only 5V power supplies required.You can input a maximum current of 300nA into this device.Comparator electronics is necessary to have a voltage of 5V for normal operation.
MAX907CSA+T Features
TTL output capability
General Purpose IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 1mA
MAX907CSA+T Applications
There are a lot of Maxim Integrated MAX907CSA+T linear comparators applications.
- Power management
- Security Detection Systems
- Window Comparators, Multivibrators
- Wearable Devices
- Threshold Detectors
- Mobile Communications
- System control and monitoring
- Window Comparators
- Consumer Medical Electronics
- Battery-Powered Electronics
