MAX907ESA-T
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 471mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX907 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Max Supply Current | 1mA |
| Propagation Delay | 50 ns |
| Quiescent Current | 1mA |
| Turn On Delay Time | 40 ns |
| Response Time | 45 ns |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 4.5V~11V |
| Input Offset Voltage (Vos) | 2mV |
| Average Bias Current-Max (IIB) | 0.5μA |
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 300nA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.3μA @ 5V |
| CMRR, PSRR (Typ) | 86.02dB CMRR, 86.02dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX907ESA-T Overview
Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.The comparator has a TTL output.The chip is packaged with Tape & Reel (TR) .As you can see, the comparator has8 terminals.Electronic comparator is a component of the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.The type of the chip can be classified as General Purpose .Electronic comparator has a total of 2 elements.The pinout of the component starts from 8 pins it has.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.You can find more pin-to-pin solutions by searching MAX907 .A quiescent current of 1mA is displayed by this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normal use of the device should require a nominal supply current of 1mA .An excess of current supply over 1mA could result in malfunction of the comparator.The device can be powered by 5V power supplies.Comparator electronics is necessary to have an operating supply voltage of 5V for normal operation.
MAX907ESA-T Features
TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 1mA
MAX907ESA-T Applications
There are a lot of Maxim Integrated MAX907ESA-T linear comparators applications.
- Motor drives
- RC Timers
- General-Purpose, Low-Voltage Applications
- Limit Comparators
- Pulse, Squarewave, and Time Delay Generators
- Window Comparators, Multivibrators
- Consumer Medical Electronics
- Handheld Instruments
- Wide Range VCO; MOS Clock Timers
- Mobile Phones and Tablets
