MAX908CSD+
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 667mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX908 |
| Pin Count | 14 |
| Output Type | TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Max Supply Current | 1mA |
| Propagation Delay | 40 ns |
| Quiescent Current | 1mA |
| Response Time | 45 ns |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 4.5V~11V |
| Input Offset Voltage (Vos) | 2mV |
| Average Bias Current-Max (IIB) | 0.5μA |
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 300nA |
| Input Bias Current | 300nA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.3μA @ 5V |
| CMRR, PSRR (Typ) | 86.02dB CMRR, 86.02dB PSRR |
| Propagation Delay (Max) | 50ns |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
MAX908CSD+ Overview
A convenient packaging is provided in the form of 14-SOIC (0.154, 3.90mm Width) .Output type TTL is used for this comparator.This package has been designed with Tube .The device is designed with 14 terminations.The electrical component here belongs to the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.In terms of type, this is a typical General Purpose comparator.There are a total of 4 elements in it.Electronic comparator includes 14 pins.Electronic comparator is recommended that the mounting type be Surface Mount .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C in order to prevent malfunctions.There are 14 pins on the comparator.You can find more pin-to-pin solutions for your special requirements by searching MAX908 .This comparator presents a quiescent current of 1mA .A Surface Mount is provided for mounting it onto a PCB or another board.For normal use of the device, the nominal supply current should be 1mA .Current supply exceeding 1mA could cause disfunction of the compartator.In order to run the device, there are only 5V power supplies required.Electronic comparator is possible to input up to 300nA current into the device.
MAX908CSD+ Features
TTL output capability
General Purpose IC
Employing 4 elements
Operates under 0°C~70°C
Quiescent Current: 1mA
MAX908CSD+ Applications
There are a lot of Maxim Integrated MAX908CSD+ linear comparators applications.
- Wireless Base Stations
- Point of load regulators
- System control and monitoring
- Industrial
- General Purpose Low Voltage Applications
- Window Comparators
- Automatic Test Equipment
- Portable Battery Monitoring
- Handheld Instruments
- Current and voltage sensing
