MAX908EPD+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 800mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | MAX908 |
| Pin Count | 14 |
| Output Type | TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Max Supply Current | 1mA |
| Propagation Delay | 40 ns |
| Quiescent Current | 1mA |
| Response Time | 45 ns |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 4.5V~11V |
| Input Offset Voltage (Vos) | 2mV |
| Average Bias Current-Max (IIB) | 0.5μA |
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 300nA |
| Input Bias Current | 300nA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.3μA @ 5V |
| CMRR, PSRR (Typ) | 86.02dB CMRR, 86.02dB PSRR |
| Propagation Delay (Max) | 50ns |
| Length | 19.05mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX908EPD+ Overview
A convenient transport package is provided in 14-DIP (0.300, 7.62mm) .There is a TTL output type for this comparator.Electronic comparator is shipped by Tube .You can find 14 terminals of the comparator.The component belongs to the Comparator family of electrical components.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.In general, the chip type can be classified as General Purpose .Electronic comparator has a total of 4 elements.Electronic comparator includes 14 pins.Electronic comparator is recommended that the mounting type be Through Hole .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.Electronic comparator has 14 pins.You can find more pin-to-pin solutions for your special requirements by searching MAX908 .There is a quiescent current of 1mA in this comparator.The PCB or other board has a Through Hole for mounting.Electronic comparator is recommended that the nominal supply current for the device be set to 1mA .Current supply exceeding 1mA could cause disfunction of the compartator.There is sufficient power to run the device from 5V power supplies.Electronic comparator is possible to input a maximum of 300nA current into the device.
MAX908EPD+ Features
TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 1mA
MAX908EPD+ Applications
There are a lot of Maxim Integrated MAX908EPD+ linear comparators applications.
- Mobile Phones
- Wireless Base Stations
- Portable and Battery-Powered Systems
- Building automation
- Mobile Communications
- Mobile Phones and Tablets
- Appliances
- Zero-Crossing Detectors
- Automotive
- System control and monitoring
