MAX908ESD+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparators |
| Max Power Dissipation | 471mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX908 |
| Pin Count | 14 |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Max Supply Current | 1mA |
| Propagation Delay | 50 ns |
| Quiescent Current | 1mA |
| Response Time | 45 ns |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 4.5V~11V |
| Input Offset Voltage (Vos) | 2mV |
| Average Bias Current-Max (IIB) | 0.5μA |
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 300nA |
| Input Bias Current | 300nA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.3μA @ 5V |
| CMRR, PSRR (Typ) | 86.02dB CMRR, 86.02dB PSRR |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX908ESD+ Overview
In order to make transportation easier, it is packaged in 14-SOIC (0.154, 3.90mm Width) .The comparator has an output type of TTL .This device is designed in Tube case.The comparator has 14 terminals.The electrical component here belongs to the Comparators family.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.Speaking of types, this is a typical General Purpose comparator.In total, it contains 4 elements.The board includes 14 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.14 pins are present on the comparator.Alternatively, you may search for MAX908 to find more pin-to-pin solutions for your specific needs.A quiescent current of 1mA is displayed by this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normally, the nominal supply current should be 1mA when using the device.A current supply greater than 1mA may cause the comparator to malfunction.In order to operate the device, 5V power supplies are sufficient.Input current to the device is limited to 300nA .Comparator electronics is necessary to have a voltage of 5V for normal operation.
MAX908ESD+ Features
TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 1mA
MAX908ESD+ Applications
There are a lot of Maxim Integrated MAX908ESD+ linear comparators applications.
- Mobile Communications
- Power Supervision
- Window Comparators
- Wide Range VCO; MOS Clock Timers
- General-Purpose Portable Devices
- Notebooks and PDAs
- Threshold Detectors
- Motor drives
- Battery-Powered Electronics
- Infotainment and Clusters
