MAX908ESD+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 667mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX908 |
| Pin Count | 14 |
| Output Type | TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 1mA |
| Max Supply Current | 1mA |
| Propagation Delay | 50 ns |
| Quiescent Current | 1mA |
| Response Time | 45 ns |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 4.5V~11V |
| Input Offset Voltage (Vos) | 2mV |
| Average Bias Current-Max (IIB) | 0.5μA |
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 300nA |
| Input Bias Current | 300nA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.3μA @ 5V |
| CMRR, PSRR (Typ) | 86.02dB CMRR, 86.02dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX908ESD+T Overview
The product is packaged in 14-SOIC (0.154, 3.90mm Width) to facilitate transportation.A comparator with an output type of TTL is being used.The part will be shipped by Tape & Reel (TR) .There are 14 terminals on the comparator.Electronic comparator is a component of the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.This is a typical comparator of type General Purpose .This element consists of 4 elements in total.Electronic comparator has 14 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.This comparator has 14 pins.In order to find a solution that meets your specific needs, search MAX908 for more pin-to-pin solutions.There is a quiescent current of 1mA in this comparator.A Surface Mount is provided for mounting on PCBs or other boards.Normal operation of the device requires a nominal supply current of 1mA .If the current supply exceeds 1mA , the comparator could malfunction.In order to run the device, there are only 5V power supplies required.The maximal current your can input into the device is 300nA .
MAX908ESD+T Features
TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 1mA
MAX908ESD+T Applications
There are a lot of Maxim Integrated MAX908ESD+T linear comparators applications.
- DC/DC and AC/DC power supplies
- Window Comparators, Multivibrators
- Infotainment & cluster
- Current and voltage sensing
- Portable and Battery-Powered Systems
- Self-diagnostics
- Ultra-Low Power Systems
- Power Supervision
- Appliances
- Lithium ion battery monitoring
