Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~125°C |
Packaging |
Tube |
Published |
2013 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Subcategory |
Comparator |
Technology |
BICMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
2 |
Supply Voltage |
2.7V |
Terminal Pitch |
0.65mm |
Base Part Number |
MAX9092 |
Output Type |
Open Drain |
Number of Elements |
2 |
Output Current |
35mA |
Propagation Delay |
110 ns |
Quiescent Current |
200μA |
Supply Current-Max |
0.3mA |
Response Time |
115 ns |
Common Mode Rejection Ratio |
90 dB |
Voltage - Supply, Single/Dual (±) |
1.8V~5.5V |
Input Offset Voltage (Vos) |
7mV |
Voltage Gain |
93.98dB |
Average Bias Current-Max (IIB) |
0.4μA |
Supply Voltage Limit-Max |
6V |
Input Bias Current |
250nA |
Current - Quiescent (Max) |
200μA |
Voltage - Input Offset (Max) |
7mV @ 5V |
Current - Input Bias (Max) |
0.25μA @ 5V |
CMRR, PSRR (Typ) |
90dB PSRR |
Current - Output (Typ) |
35mA @ 5V |
Height Seated (Max) |
1.1mm |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
MAX9092AUA+ Overview
In order to facilitate transportation, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .There is a comparator of type Open Drain output on this device.The chip is packaged with Tube .Electronic comparator is possible to find the 8 terminals of the comparator.Electronic comparator is a part of Comparator family.With a voltage of 2.7V supplied, the comparator is capable of performing a wide range of demanding tasks.A comparator of this type is typically of type General Purpose .This element consists of 2 elements in total.The recommended mounting type is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~125°C in order to prevent malfunctions.This comparator has 8 pins.You can find more pin-to-pin solutions by searching MAX9092 .The comparator presents a quiescent current of 200μA volts.A Surface Mount is provided for mounting it onto a PCB or another board.Comparator electronics is apparent from the voltage formula that the voltage gain for the part is 93.98dB .With this part, a minimum current of 0.3mA can be supplied.
MAX9092AUA+ Features
Open Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~125°C
Quiescent Current: 200μA
Voltage Gain: 93.98dB
MAX9092AUA+ Applications
There are a lot of Maxim Integrated MAX9092AUA+ linear comparators applications.
- Battery management and protection
- Notebooks and PDAs
- Zero-Crossing Detectors
- Security Detection Systems
- Simple Analog-to-Digital Converters (ADCs)
- Motor drives
- Consumer Medical Electronics
- Mobile Phones and Tablets
- Portable Battery Monitoring
- Current and voltage sensing