MAX9095ASD+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2014 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX9095 |
| Output Type | Open Drain |
| Number of Elements | 4 |
| Power Supplies | 1.8/5V |
| Operating Supply Current | 360μA |
| Output Current | 35mA |
| Propagation Delay | 110 ns |
| Quiescent Current | 400μA |
| Supply Current-Max | 0.5mA |
| Response Time | 115 ns |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Output Current per Channel | 35mA |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 93.98dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 250nA |
| Input Bias Current | 250nA |
| Current - Quiescent (Max) | 400μA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 250nA @ 5V |
| Hysteresis | 2mV |
| Current - Output (Typ) | 35mA @ 5V |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX9095ASD+ Overview
A convenient packaging is provided in the form of 14-SOIC (0.154, 3.90mm Width) .Output type of this comparator is Open Drain .As a result, it is designed with Tube package.There are14 terminals on the comparator.The chip belongs to Comparator .A comparator supplied with 2.7V voltage can complete many demanding tasks.This is a typical comparator of type General Purpose .This element consists of 4 elements in total.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~125°C in order to prevent malfunctions.14 pins are present on the comparator.You can find more pin-to-pin solutions for your special requirements by searching MAX9095 .As a result, this comparator displays a quiescent current of 400μA .Electronic comparator has a Surface Mount for mounting on PCB or other boards.1.8/5V power supplies are enough to run the device.Electronic comparator is possible to input a maximum of 250nA current into the device.In accordance with the voltage formula, the part's voltage gain is 93.98dB .With this part, a minimum current of 0.5mA can be supplied.
MAX9095ASD+ Features
Open Drain output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 400μA
Voltage Gain: 93.98dB
MAX9095ASD+ Applications
There are a lot of Maxim Integrated MAX9095ASD+ linear comparators applications.
- Appliances
- Lithium ion battery monitoring
- Wireless Base Stations
- Wide Range VCO; MOS Clock Timers
- Simple Analog-to-Digital Converters (ADCs)
- Wearable Devices
- Consumer Medical Electronics
- Hand-Held Electronics
- Power management
- RC Timers
