MAX9095AUD+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | MATTE TIN |
| Subcategory | Comparator |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | MAX9095 |
| Output Type | Open Drain |
| Number of Elements | 4 |
| Power Supplies | 1.8/5V |
| Output Current | 35mA |
| Propagation Delay | 110 ns |
| Quiescent Current | 400μA |
| Supply Current-Max | 0.5mA |
| Response Time | 115 ns |
| Voltage - Supply, Single/Dual (±) | 1.8V~5.5V |
| Input Offset Voltage (Vos) | 7mV |
| Voltage Gain | 93.98dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 250nA |
| Current - Quiescent (Max) | 400μA |
| Voltage - Input Offset (Max) | 7mV @ 5V |
| Current - Input Bias (Max) | 250nA @ 5V |
| Hysteresis | 2mV |
| Current - Output (Typ) | 35mA @ 5V |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
MAX9095AUD+T Overview
The product is packaged in 14-TSSOP (0.173, 4.40mm Width) for ease of transportation.A comparator with an output type of Open Drain is being used.Ready for shipping in Tape & Reel (TR) package.The comparator has 14 terminals.The component belongs to the Comparator family of electrical components.A comparator supplied with 2.7V voltage can complete many demanding tasks.A comparator of this type is typically of type General Purpose .In total, it contains 4 elements.The recommended mounting type is Surface Mount .The operating temperature should be set to -40°C~125°C to avoid mal-function.This comparator has 14 pins.You can search MAX9095 if you are looking for more pin-to-pin solutions.A quiescent current of 400μA is observed in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Electronic comparator is sufficient to run the device wElectronic comparatorh 1.8/5V power supplies.Based on the voltage formula, the voltage gain of the part is 93.98dB .The maximum current that can be supplied to this part is 0.5mA .
MAX9095AUD+T Features
Open Drain output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~125°C
Quiescent Current: 400μA
Voltage Gain: 93.98dB
MAX9095AUD+T Applications
There are a lot of Maxim Integrated MAX9095AUD+T linear comparators applications.
- Window Comparators
- General-Purpose Portable Devices
- Factory automation & control
- Zero-Crossing Detectors
- Consumer Medical Electronics
- Mobile Phones and Tablets
- Point of load regulators
- Battery-Powered Electronics
- High-Speed Sampling Circuits
- Window Comparators
