MAX9100ESA+
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 571mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9100 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 13μA |
| Max Supply Current | 13μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 13μA |
| Common Mode Rejection Ratio | 66 dB |
| Voltage - Supply, Single/Dual (±) | 1V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Average Bias Current-Max (IIB) | 0.03μA |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 15nA |
| Input Bias Current | 15nA |
| Voltage - Input Offset (Max) | 10mV @ 5.5V |
| Current - Input Bias (Max) | 0.015μA @ 5.5V |
| Hysteresis | ±2mV |
| CMRR, PSRR (Typ) | 68dB CMRR, 66dB PSRR |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9100ESA+ Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .A comparator with a CMOS, Push-Pull, Rail-to-Rail, TTL output is used here.The chip is packaged with Tube .There are8 terminals on the comparator.Other Comparator like the device play a important role in the industry.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.Electronic comparator is possible to classify the chip as General Purpose .Electronic comparator has a total of 1 elements.Electronic comparator includes 8 pins.Electronic comparator is recommended to mount using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.There are 8 pins on the comparator.You can find more pin-to-pin solutions by searching MAX9100 .There is a quiescent current of 13μA in this comparator.The PCB or other board can be mounted using the Surface Mount on it.Normal use of the device should require a nominal supply current of 13μA .An excess of current supply over 13μA could result in malfunction of the comparator.Electronic comparator is possible to input a maximum of 15nA current into the device.
MAX9100ESA+ Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 13μA
MAX9100ESA+ Applications
There are a lot of Maxim Integrated MAX9100ESA+ linear comparators applications.
- Battery management and protection
- High-Speed Sampling Circuits
- Multivibrators and High-Voltage Digital Logic Gates
- Industrial
- Wearable Devices
- Notebooks and PDAs
- Mobile Phones
- Self-diagnostics
- Window Comparators
- Power Supervision
