MAX9100EUK-T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX9100 |
| Pin Count | 5 |
| JESD-30 Code | R-PDSO-G5 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Voltage - Supply, Single/Dual (±) | 1V~5.5V |
| Average Bias Current-Max (IIB) | 0.03μA |
| Supply Voltage Limit-Max | 6V |
| Current - Quiescent (Max) | 13μA |
| Voltage - Input Offset (Max) | 10mV @ 5.5V |
| Current - Input Bias (Max) | 0.015μA @ 5.5V |
| Hysteresis | ±2mV |
| CMRR, PSRR (Typ) | 68dB CMRR, 66dB PSRR |
| Propagation Delay (Max) | 4.5μs |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
MAX9100EUK-T Overview
For convenience, it is packaged in SC-74A, SOT-753 .The comparator has an output type of CMOS, Push-Pull, Rail-to-Rail, TTL .As a result, it is designed with Tape & Reel (TR) package.The comparator has a total of 5 terminals.The component belongs to the Comparator family of electrical components.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.In general, the chip type can be classified as General Purpose .Electronic comparator has a total of 1 elements.The board includes 5 pins.Electronic comparator is recommended to mount the device using type Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .Try search MAX9100 to get more pin-to-pin solutions for your special needs.
MAX9100EUK-T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
MAX9100EUK-T Applications
There are a lot of Maxim Integrated MAX9100EUK-T linear comparators applications.
- Battery management and protection
- Motor drives
- High-Speed Differential Line Receiver
- Building automation
- Battery-Powered Electronics
- Multivibrators and High-Voltage Digital Logic Gates
- Laptop Computers
- Analog front end
- Simple Analog-to-Digital Converters (ADCs)
- Wide Range VCO; MOS Clock Timers
