MAX9100EUK+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 571mW |
| Technology | BICMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9100 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 13μA |
| Max Supply Current | 13μA |
| Propagation Delay | 4.5 μs |
| Quiescent Current | 13μA |
| Common Mode Rejection Ratio | 66 dB |
| Voltage - Supply, Single/Dual (±) | 1V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Average Bias Current-Max (IIB) | 0.03μA |
| Power Supply Rejection Ratio (PSRR) | 66dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 15nA |
| Input Bias Current | 15nA |
| Voltage - Input Offset (Max) | 10mV @ 5.5V |
| Current - Input Bias (Max) | 0.015μA @ 5.5V |
| Hysteresis | ±2mV |
| CMRR, PSRR (Typ) | 68dB CMRR, 66dB PSRR |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9100EUK+T Overview
In order to make transportation easier, it is packaged in SC-74A, SOT-753 .The comparator has a type CMOS, Push-Pull, Rail-to-Rail, TTL output.We ship the part through Tape & Reel (TR) .You can find 5 terminals of the comparator.Electronic comparator is a component of the Comparators family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.A comparator of this type is typically of type General Purpose .Electronic comparator has a total of 1 elements.The pinout of the component starts from 5 pins it has.In general, mounting type Surface Mount is recommended.As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.Electronic comparator has 5 pins.In case you are looking for more pin-to-pin solutions, you may want to search MAX9100 .In this comparator, the quiescent current is 13μA .The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current of the device be 13μA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 13μA .There is a maximum current that can be input into the device of 15nA .
MAX9100EUK+T Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 13μA
MAX9100EUK+T Applications
There are a lot of Maxim Integrated MAX9100EUK+T linear comparators applications.
- Handheld Instruments
- Ultra-Low Power Systems
- Self-diagnostics
- General Purpose Low Voltage Applications
- Point of load regulators
- Current and voltage sensing
- Alarm and Monitoring Circuits
- Consumer Medical Electronics
- Building automation
- Automatic Test Equipment
