Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-8 |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2007 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Subcategory |
Comparator |
Max Power Dissipation |
470mW |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
MAX9107 |
Pin Count |
8 |
Output Type |
TTL |
Operating Supply Voltage |
5V |
Number of Elements |
2 |
Power Supplies |
5V |
Nominal Supply Current |
700μA |
Max Supply Current |
700μA |
Propagation Delay |
25 ns |
Quiescent Current |
700μA |
Common Mode Rejection Ratio |
86.02 dB |
Voltage - Supply, Single/Dual (±) |
4.5V~5.5V |
Input Offset Voltage (Vos) |
1.6mV |
Average Bias Current-Max (IIB) |
0.35μA |
Power Supply Rejection Ratio (PSRR) |
86.02dB |
Supply Voltage Limit-Max |
6V |
Max Input Current |
125nA |
Input Bias Current |
125nA |
Voltage - Input Offset (Max) |
1.6mV @ 5V |
Current - Input Bias (Max) |
0.125μA @ 5V |
Hysteresis |
2mV |
CMRR, PSRR (Typ) |
86.02dB CMRR, 86.02dB PSRR |
Height Seated (Max) |
1.45mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX9107EKA+T Overview
To facilitate transportation, it comes packaged in SOT-23-8 .There is a TTL output type for this comparator.Electronic comparator is shipped by Tape & Reel (TR) .You can find 8 terminals of the comparator.The chip belongs to Comparator .A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.When it comes to types, this comparator is a typical General Purpose .There are a total of 2 elements in it.The device includes 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .The comparator consists of 8 pins.You may wish to search MAX9107 for more solutions that address your specific needs.The comparator presents a quiescent current of 700μA volts.A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current be 700μA in order to use the device normally.The compartator could be damaged if the current supply exceeds 700μA .5V power supplies are enough to run the device.Electronic comparator is possible to input a maximum current of 125nA into the device.A normal operation requires a voltage of 5V .
MAX9107EKA+T Features
TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 700μA
MAX9107EKA+T Applications
There are a lot of Maxim Integrated MAX9107EKA+T linear comparators applications.
- Multivibrators and High-Voltage Digital Logic Gates
- Simple Analog-to-Digital Converters (ADCs)
- Point of load regulators
- General-Purpose Portable Devices
- General Purpose Low Voltage Applications
- Battery-Powered Electronics
- Power Supervision
- High-Speed Differential Line Receiver
- Window Comparators
- Infotainment and Clusters