MAX9107ESA+
| Parameters | |
|---|---|
| Input Offset Voltage (Vos) | 1.6mV |
| Average Bias Current-Max (IIB) | 0.35μA |
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 125nA |
| Input Bias Current | 125nA |
| Voltage - Input Offset (Max) | 1.6mV @ 5V |
| Current - Input Bias (Max) | 0.125μA @ 5V |
| Hysteresis | 2mV |
| CMRR, PSRR (Typ) | 86.02dB CMRR, 86.02dB PSRR |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 470mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX9107 |
| Pin Count | 8 |
| Output Type | TTL |
| Number of Elements | 2 |
| Power Supplies | 5V |
| Nominal Supply Current | 700μA |
| Max Supply Current | 700μA |
| Propagation Delay | 25 ns |
| Quiescent Current | 700μA |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
MAX9107ESA+ Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .There is a comparator of type TTL output on this device.This package has been designed with Tube .The comparator has 8 terminals.The chip belongs to Comparator .When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.Electronic comparator can be classified as a General Purpose chip.Electronic comparator consists of 2 elements in total.The board includes 8 pins.In general, mounting type Surface Mount is recommended.The operating temperature should be set to -40°C~85°C to avoid mal-function.The comparator is equipped with 8 pins.If you require more pin-to-pin solutions, search MAX9107 for more options.The comparator presents a quiescent current of 700μA volts.A Surface Mount is provided for mounting it onto a PCB or another board.Electronic comparator is recommended that the nominal supply current of the device be 700μA .If the current supply exceeds 700μA , the comparator might be damaged.In order to run the device, there are only 5V power supplies required.A maximum current of 125nA can be supplied to the device.
MAX9107ESA+ Features
TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 700μA
MAX9107ESA+ Applications
There are a lot of Maxim Integrated MAX9107ESA+ linear comparators applications.
- Portable and Battery-Powered Systems
- Mobile Phones and Tablets
- High-Speed Sampling Circuits
- Wide Range VCO; MOS Clock Timers
- Window Comparators, Multivibrators
- Industrial
- Infotainment & cluster
- Consumer Medical Electronics
- Body Control Modules
- Zero-Crossing Detectors
