MAX9108ESD+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 666mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | MAX9108 |
| Pin Count | 14 |
| Output Type | TTL |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 1.4mA |
| Max Supply Current | 1.4mA |
| Propagation Delay | 25 ns |
| Quiescent Current | 700μA |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Input Offset Voltage (Vos) | 1.6mV |
| Average Bias Current-Max (IIB) | 0.35μA |
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 125nA |
| Current - Quiescent (Max) | 700μA |
| Voltage - Input Offset (Max) | 1.6mV @ 5V |
| Current - Input Bias (Max) | 0.125μA @ 5V |
| Hysteresis | 2mV |
| CMRR, PSRR (Typ) | 86.02dB CMRR, 86.02dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9108ESD+ Overview
In order to make transportation easier, it is packaged in 14-SOIC (0.154, 3.90mm Width) .This comparator is of the TTL output type.The chip is packaged with Tube .There are 14 terminals on the comparator.The electrical component in this case belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .When it comes to types, this comparator is a typical General Purpose .This element consists of 4 elements in total.The board includes 14 pins.A Surface Mount mounting type is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.This comparator has 14 pins.If you require more pin-to-pin solutions, search MAX9108 for more options.As a result, this comparator displays a quiescent current of 700μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Normal operation of the device requires a nominal supply current of 1.4mA .If the current supply exceeds 1.4mA , the comparator could malfunction.The device can be powered by 5V power supplies.
MAX9108ESD+ Features
TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 700μA
MAX9108ESD+ Applications
There are a lot of Maxim Integrated MAX9108ESD+ linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Automotive
- Multivibrators and High-Voltage Digital Logic Gates
- Laptop Computers
- Point of load regulators
- Hand-Held Electronics
- Zero-Crossing Detectors
- Analog front end
- Portable Battery Monitoring
- Mobile Communications
