Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
14-SOIC (0.154, 3.90mm Width) |
Number of Pins |
14 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2007 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
14 |
ECCN Code |
EAR99 |
Type |
General Purpose |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparators |
Max Power Dissipation |
666mW |
Technology |
BIPOLAR |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
5V |
Terminal Pitch |
1.27mm |
Base Part Number |
MAX9108 |
Pin Count |
14 |
Output Type |
TTL |
Number of Elements |
4 |
Power Supplies |
5V |
Nominal Supply Current |
1.4mA |
Max Supply Current |
1.4mA |
Propagation Delay |
25 ns |
Quiescent Current |
700μA |
Common Mode Rejection Ratio |
86.02 dB |
Voltage - Supply, Single/Dual (±) |
4.5V~5.5V |
Input Offset Voltage (Vos) |
1.6mV |
Average Bias Current-Max (IIB) |
0.35μA |
Supply Voltage Limit-Max |
6V |
Input Bias Current |
125nA |
Current - Quiescent (Max) |
700μA |
Voltage - Input Offset (Max) |
1.6mV @ 5V |
Current - Input Bias (Max) |
0.125μA @ 5V |
Hysteresis |
2mV |
CMRR, PSRR (Typ) |
86.02dB CMRR, 86.02dB PSRR |
Height Seated (Max) |
1.75mm |
Length |
8.65mm |
Width |
3.9mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX9108ESD+T Overview
A convenient transport package is provided in 14-SOIC (0.154, 3.90mm Width) .The comparator has an output type of TTL .The chip is packaged with Tape & Reel (TR) .The device is designed with 14 terminations.Electronic comparator is a part of Comparators family.A comparator supplied with 5V voltage can complete many demanding tasks.In terms of type, this is a typical General Purpose comparator.This is a 4 element comparator.A total of 14 pins are included.The recommended mounting method is Surface Mount .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.The comparator has a pin count of 14 .You may wish to search MAX9108 for more solutions that address your specific needs.The comparator displays a quiescent current of 700μA .There is a Surface Mount for mounting it on a PCB or other board.Normally, the nominal supply current should be 1.4mA when using the device.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 1.4mA .A power supply of 5V is sufficient for the operation of the device.
MAX9108ESD+T Features
TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 700μA
MAX9108ESD+T Applications
There are a lot of Maxim Integrated MAX9108ESD+T linear comparators applications.
- Multivibrators and High-Voltage Digital Logic Gates
- Lithium ion battery monitoring
- Metering Systems
- Hand-Held Electronics
- Laptop Computers
- Notebooks and PDAs
- Automatic Test Equipment
- Analog front end
- General-Purpose, Low-Voltage Applications
- Building automation