MAX9108EUD+
| Parameters | |
|---|---|
| Quiescent Current | 700μA |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Input Offset Voltage (Vos) | 1.6mV |
| Average Bias Current-Max (IIB) | 0.35μA |
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 125nA |
| Current - Quiescent (Max) | 700μA |
| Voltage - Input Offset (Max) | 1.6mV @ 5V |
| Current - Input Bias (Max) | 0.125μA @ 5V |
| Hysteresis | 2mV |
| CMRR, PSRR (Typ) | 86.02dB CMRR, 86.02dB PSRR |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparator |
| Max Power Dissipation | 666mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX9108 |
| Pin Count | 14 |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 4 |
| Power Supplies | 5V |
| Nominal Supply Current | 1.4mA |
| Max Supply Current | 1.4mA |
| Propagation Delay | 25 ns |
MAX9108EUD+ Overview
Electronic comparator is packaged in 14-TSSOP (0.173, 4.40mm Width) for convenient transportation.There is a TTL output type for this comparator.This chip is designed with the Tube package.As you can see, the comparator has14 terminals.The chip belongs to Comparator .The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.When it comes to types, this comparator is a typical General Purpose .Electronic comparator has a total of 4 elements.The device includes 14 pins.The type of mounting recommended is Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.The comparator has a pin count of 14 .You can find more pin-to-pin solutions for your special requirements by searching MAX9108 .As a result, this comparator displays a quiescent current of 700μA .A Surface Mount is provided for mounting on PCBs or other boards.Normally, the nominal supply current should be 1.4mA when using the device.A supply current exceeding 1.4mA may result in the comparator malfunctioning.The device can be run with 5V power supplies.For normal operation, there should be 5V operating supply voltage applied.
MAX9108EUD+ Features
TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 700μA
MAX9108EUD+ Applications
There are a lot of Maxim Integrated MAX9108EUD+ linear comparators applications.
- RC Timers
- High-Speed Sampling Circuits
- Simple Analog-to-Digital Converters (ADCs)
- Infotainment & cluster
- Alarm and Monitoring Circuits
- High-Speed Differential Line Receiver
- Wireless Base Stations
- General Purpose Low Voltage Applications
- General-Purpose Portable Devices
- Handheld Instruments
