MAX9109ESA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 470mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9109 |
| Pin Count | 8 |
| Output Type | TTL |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Nominal Supply Current | 350μA |
| Max Supply Current | 350μA |
| Propagation Delay | 25 ns |
| Quiescent Current | 700μA |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Input Offset Voltage (Vos) | 1.6mV |
| Average Bias Current-Max (IIB) | 0.35μA |
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 125nA |
| Current - Quiescent (Max) | 700μA |
| Voltage - Input Offset (Max) | 1.6mV @ 5V |
| Current - Input Bias (Max) | 0.125μA @ 5V |
| Hysteresis | 2mV |
| CMRR, PSRR (Typ) | 86.02dB CMRR, 86.02dB PSRR |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9109ESA+ Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.A comparator with a TTL output is used here.We ship the part through Tube .As you can see, the comparator has8 terminals.Electronic comparator is a component of the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.A comparator of this type is typically of type with Latch .There are a total of 1 elements in it.A total of 8 pins are included.The type of mounting recommended is Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .8 pins are present on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search MAX9109 .A quiescent current of 700μA is observed in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normal operation of the device requires a nominal supply current of 350μA .The compartator could be damaged if the current supply exceeds 350μA .5V power supplies are enough to run the device.
MAX9109ESA+ Features
TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 700μA
MAX9109ESA+ Applications
There are a lot of Maxim Integrated MAX9109ESA+ linear comparators applications.
- Zero-Crossing Detectors
- Power Supervision
- Hand-Held Electronics
- General-Purpose, Low-Voltage Applications
- Battery-Powered Electronics
- Self-diagnostics
- Infotainment and Clusters
- Window Comparators, Multivibrators
- Portable Battery Monitoring
- Handheld Instruments
