MAX9109ESA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparator |
| Max Power Dissipation | 470mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9109 |
| Pin Count | 8 |
| Output Type | TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Power Supplies | 5V |
| Nominal Supply Current | 350μA |
| Max Supply Current | 350μA |
| Propagation Delay | 25 ns |
| Quiescent Current | 700μA |
| Common Mode Rejection Ratio | 86.02 dB |
| Voltage - Supply, Single/Dual (±) | 4.5V~5.5V |
| Input Offset Voltage (Vos) | 1.6mV |
| Average Bias Current-Max (IIB) | 0.35μA |
| Power Supply Rejection Ratio (PSRR) | 86.02dB |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 125nA |
| Current - Quiescent (Max) | 700μA |
| Voltage - Input Offset (Max) | 1.6mV @ 5V |
| Current - Input Bias (Max) | 0.125μA @ 5V |
| Hysteresis | 2mV |
| CMRR, PSRR (Typ) | 86.02dB CMRR, 86.02dB PSRR |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9109ESA+T Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) in order to facilitate transportation.There is a comparator of type TTL output on this device.The part is shipped by Tape & Reel (TR) .You can find 8 terminals of the comparator.The electrical component here belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .A comparator of this type is typically of type with Latch .The total number of elements is 1 .The device includes 8 pins.The recommended mounting type is Surface Mount .A temperature setting of -40°C~85°C should be used for the operating temperature in order to prevent malfunctions.There are 8 pins on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search MAX9109 .The comparator displays a quiescent current of 700μA .This component has a Surface Mount mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current for the device be set to 350μA .An excess of current supply over 350μA could result in malfunction of the comparator.5V power supplies are enough to run the device.The normal operation of the system requires 5V operating voltage.
MAX9109ESA+T Features
TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 700μA
MAX9109ESA+T Applications
There are a lot of Maxim Integrated MAX9109ESA+T linear comparators applications.
- Self-diagnostics
- Window Comparators
- RC Timers
- Window Comparators
- General Purpose Low Voltage Applications
- Limit Comparators
- Analog front end
- Simple Analog-to-Digital Converters (ADCs)
- Appliances
- Battery-Powered Electronics
