MAX9117ESA+
| Parameters | |
|---|---|
| Packaging | Tube |
| Published | 2007 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9117 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 2/5V |
| Output Current | 50mA |
| Propagation Delay | 40 μs |
| Quiescent Current | 1.6μA |
| Response Time | 40000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.65V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.002μA |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 1nA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 80dB PSRR |
| Propagation Delay (Max) | 40μs |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
MAX9117ESA+ Overview
The product is packaged in 8-SOIC (0.154, 3.90mm Width) to facilitate transportation.There is a CMOS, Push-Pull, Rail-to-Rail, TTL output type for this comparator.The chip is packaged with Tube .Electronic comparator is possible to find the 8 terminals of the comparator.Electronic comparator is a component of the Comparators family.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.It's a typical with Voltage Reference comparator.There are a total of 1 elements in it.There are 8 pins on this board.Electronic comparator is recommended to mount using type Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.There are 8 pins on the comparator.In case you are looking for more pin-to-pin solutions, you may want to search MAX9117 .A quiescent current of 1.6μA is observed in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.In order to run the device, there are only 2/5V power supplies required.The part is from Beyond-the-Rails? comparator series.
MAX9117ESA+ Features
CMOS, Push-Pull, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.6μA
MAX9117ESA+ Applications
There are a lot of Maxim Integrated MAX9117ESA+ linear comparators applications.
- RC Timers
- Mobile Phones
- High-Speed Differential Line Receiver
- Power Supervision
- Lithium ion battery monitoring
- Notebooks and PDAs
- Threshold Detectors
- Portable Battery Monitoring
- Window Comparators
- Body Control Modules
