Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
5-TSSOP, SC-70-5, SOT-353 |
Number of Pins |
5 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2007 |
Series |
Beyond-the-Rails™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
ECCN Code |
EAR99 |
Type |
with Voltage Reference |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Comparators |
Max Power Dissipation |
200mW |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Base Part Number |
MAX9118 |
Pin Count |
5 |
Output Type |
CMOS, Open-Drain, Rail-to-Rail, TTL |
Number of Elements |
1 |
Nominal Supply Current |
1.3μA |
Output Current |
50mA |
Max Supply Current |
1.3μA |
Propagation Delay |
45 μs |
Quiescent Current |
1.6μA |
Turn On Delay Time |
45 μs |
Common Mode Rejection Ratio |
80 dB |
Voltage - Supply, Single/Dual (±) |
1.6V~5.5V |
Output Current per Channel |
50mA |
Input Offset Voltage (Vos) |
5mV |
Average Bias Current-Max (IIB) |
0.002μA |
Power Supply Rejection Ratio (PSRR) |
80dB |
Supply Voltage Limit-Max |
6V |
Max Input Current |
1nA |
Input Bias Current |
1nA |
Current - Quiescent (Max) |
1.6μA |
Voltage - Input Offset (Max) |
5mV @ 5V |
Current - Input Bias (Max) |
0.001μA @ 5V |
Hysteresis |
4mV |
CMRR, PSRR (Typ) |
80dB PSRR |
Length |
2mm |
Radiation Hardening |
No |
REACH SVHC |
Unknown |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MAX9118EXK+T Overview
In order to facilitate transportation, it is packaged in 5-TSSOP, SC-70-5, SOT-353 .Output type of this comparator is CMOS, Open-Drain, Rail-to-Rail, TTL .The chip is packaged with Tape & Reel (TR) .There are 5 terminals on the comparator.The electrical component in this case belongs to the Comparators families.A comparator supplied with 5V voltage can complete many demanding tasks.When it comes to types, this comparator is a typical with Voltage Reference .This element consists of 1 elements in total.The device includes 5 pins.Surface Mount universial mout for easy adapting.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.The comparator has a pin count of 5 .If you require more pin-to-pin solutions, search MAX9118 for more options.The comparator displays a quiescent current of 1.6μA .The PCB or other board has a Surface Mount for mounting.The nominal supply current of the device should be 1.3μA for normal use.Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 1.3μA .You are allowed to input a maximum current of 1nA into the device.This part is from the Beyond-the-Rails? comparator series.
MAX9118EXK+T Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.6μA
MAX9118EXK+T Applications
There are a lot of Maxim Integrated MAX9118EXK+T linear comparators applications.
- Notebooks and PDAs
- Battery-Powered Electronics
- General Purpose Low Voltage Applications
- Window Comparators
- Laptop Computers
- Infotainment and Clusters
- Infotainment & cluster
- Alarm and Monitoring Circuits
- RC Timers
- Pulse, Squarewave, and Time Delay Generators