MAX9120EXK-T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX9120 |
| Pin Count | 5 |
| JESD-30 Code | R-PDSO-G5 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Power Supplies | 2/5V |
| Response Time | 45000 ns |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Average Bias Current-Max (IIB) | 0.002μA |
| Supply Voltage Limit-Max | 6V |
| Current - Quiescent (Max) | 1.2μA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 66.02dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 50mA |
| Propagation Delay (Max) | 45μs |
| Length | 2mm |
| RoHS Status | ROHS3 Compliant |
MAX9120EXK-T Overview
The product is packaged in 5-TSSOP, SC-70-5, SOT-353 to facilitate transportation.The comparator has a type CMOS, Open-Drain, Rail-to-Rail, TTL output.Ready for shipping in Tape & Reel (TR) package.There are 5 terminals on the comparator.Electronic comparator is a component of the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.When it comes to types, this comparator is a typical General Purpose .A total of 1 elements can be found in it.There are 5 pins on this board.Electronic comparator is recommended that the mounting type be Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.Alternatively, you may search for MAX9120 to find more pin-to-pin solutions for your specific needs.In order to operate the device, 2/5V power supplies are sufficient.A comparator part from the Beyond-the-Rails? series is used in this part.
MAX9120EXK-T Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
MAX9120EXK-T Applications
There are a lot of Maxim Integrated MAX9120EXK-T linear comparators applications.
- Automatic Test Equipment
- Motor drives
- Mobile Phones
- Factory automation & control
- Mobile Phones and Tablets
- Ultra-Low Power Systems
- Power management
- Infotainment & cluster
- Body Control Modules
- DC/DC and AC/DC power supplies
