MAX9120EXK+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | Beyond-the-Rails™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 200mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9120 |
| Pin Count | 5 |
| Output Type | CMOS, Open-Drain, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 800nA |
| Output Current | 50mA |
| Max Supply Current | 800nA |
| Propagation Delay | 45 μs |
| Quiescent Current | 1.2μA |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 1.6V~5.5V |
| Input Offset Voltage (Vos) | 5mV |
| Average Bias Current-Max (IIB) | 0.002μA |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 1nA |
| Input Bias Current | 1nA |
| Current - Quiescent (Max) | 1.2μA |
| Voltage - Input Offset (Max) | 5mV @ 5V |
| Current - Input Bias (Max) | 0.001μA @ 5V |
| Hysteresis | 4mV |
| CMRR, PSRR (Typ) | 66.02dB CMRR, 80dB PSRR |
| Length | 2mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9120EXK+T Overview
Electronic comparator is packaged in 5-TSSOP, SC-70-5, SOT-353 for convenient transportation.There is a comparator of type CMOS, Open-Drain, Rail-to-Rail, TTL output on this device.This package has been designed with Tape & Reel (TR) .5 terminals are found on the comparator.Electronic comparator is a component of the Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.In terms of type, this is a typical General Purpose comparator.There are a total of 1 elements in it.The board includes 5 pins.In general, mounting type Surface Mount is recommended.In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .There are 5 pins on the comparator.You may wish to search MAX9120 for more solutions that address your specific needs.This comparator presents a quiescent current of 1.2μA .The PCB or other board can be mounted using the Surface Mount on it.Normal operation of the device requires a nominal supply current of 800nA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 800nA .Electronic comparator is possible to input up to 1nA current into the device.A comparator part from the Beyond-the-Rails? series is used in this part.
MAX9120EXK+T Features
CMOS, Open-Drain, Rail-to-Rail, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 1.2μA
MAX9120EXK+T Applications
There are a lot of Maxim Integrated MAX9120EXK+T linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Zero-Crossing Detectors
- Mobile Communications
- Multivibrators and High-Voltage Digital Logic Gates
- Security Detection Systems
- Infotainment and Clusters
- Factory automation & control
- Lithium ion battery monitoring
- Portable Battery Monitoring
- Battery management and protection
