MAX912CPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 727mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX912 |
| Pin Count | 16 |
| Output Type | Complementary, TTL |
| Number of Circuits | 2 |
| Nominal Supply Current | 10mA |
| Output Current | 20mA |
| Max Supply Current | 10mA |
| Propagation Delay | 14 ns |
| Quiescent Current | 10mA |
| Response Time | 10 ns |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V |
| Input Offset Voltage (Vos) | 2mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 70.88dB |
| Average Bias Current-Max (IIB) | 8μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 7V |
| Dual Supply Voltage | 5V |
| Input Bias Current | 5μA |
| Neg Supply Voltage-Max (Vsup) | -7V |
| Voltage - Input Offset (Max) | 2mV @ ±5V |
| Current - Input Bias (Max) | 5μA @ ±5V |
| CMRR, PSRR (Typ) | 110dB CMRR, 100dB PSRR |
| Current - Output (Typ) | 20mA |
| Height | 4.45mm |
| Length | 19.43mm |
| Width | 7.87mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX912CPE+ Overview
In order to make transportation easier, it is packaged in 16-DIP (0.300, 7.62mm) .Output type of this comparator is Complementary, TTL .The chip is packaged with Tube .You can find 16 terminals of the comparator.The component belongs to the Comparator family of electrical components.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.Electronic comparator can be classified as a with Latch chip.The device contains 16 pins.The recommended mounting method is Through Hole .As a precaution, it is recommended to set the operating temperature to 0°C~70°C to prevent malfunctions.This comparator has 16 pins.In case you are looking for more pin-to-pin solutions, you may want to search MAX912 .There is 10mA current flowing in this comparator.Electronic comparator has a Through Hole for mounting on PCB or other boards.Electronic comparator is recommended that the nominal supply current for the device be set to 10mA .Electronic comparator is possible for the comparator to malfunction if the current supply exceeds 10mA .According to the voltage formula, the part has a voltage gain of 70.88dB .
MAX912CPE+ Features
Complementary, TTL output capability
with Latch IC
Operates under 0°C~70°C
Quiescent Current: 10mA
Voltage Gain: 70.88dB
MAX912CPE+ Applications
There are a lot of Maxim Integrated MAX912CPE+ linear comparators applications.
- Consumer Medical Electronics
- Mobile Phones and Tablets
- Self-diagnostics
- Mobile Phones
- Appliances
- Mobile Communications
- DC/DC and AC/DC power supplies
- Security Detection Systems
- General Purpose Low Voltage Applications
- Current and voltage sensing
