MAX912CSE
| Parameters | |
|---|---|
| REACH SVHC | Unknown |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Max Power Dissipation | 696mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX912 |
| Pin Count | 16 |
| Output Type | Complementary, TTL |
| Number of Elements | 2 |
| Nominal Supply Current | 10mA |
| Output Current | 20mA |
| Max Supply Current | 10mA |
| Propagation Delay | 14 ns |
| Quiescent Current | 10mA |
| Turn On Delay Time | 16 ns |
| Response Time | 10 ns |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V |
| Input Offset Voltage (Vos) | 2mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 70.88dB |
| Average Bias Current-Max (IIB) | 8μA |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 7V |
| Dual Supply Voltage | 5V |
| Input Bias Current | 5μA |
| Neg Supply Voltage-Max (Vsup) | -7V |
| Voltage - Input Offset (Max) | 2mV @ ±5V |
| Current - Input Bias (Max) | 5μA @ ±5V |
| CMRR, PSRR (Typ) | 110dB CMRR, 100dB PSRR |
| Height | 1.5mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
MAX912CSE Overview
A convenient transport package is provided in 16-SOIC (0.154, 3.90mm Width) .Output type Complementary, TTL is used for this comparator.The part is shipped by Tube .The comparator has a total of 16 terminals.Electronic comparator is a part of Comparator family.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.Electronic comparator is possible to classify the chip as with Latch .The total number of elements is 2 .There are 16 pins on this board.The recommended mounting type is Surface Mount .As a precaution, it is recommended to set the operating temperature to 0°C~70°C to prevent malfunctions.The comparator is equipped with 16 pins.You can search MAX912 if you are looking for more pin-to-pin solutions.The comparator displays a quiescent current of 10mA .There is a Surface Mount on the board for mounting to a PCB or other board.Normal use of the device should require a nominal supply current of 10mA .Electronic comparator is possible for the comparator to malfunction when the current supply exceeds 10mA .Comparator electronics is clear from the voltage formula that the voltage gain of the part is 70.88dB .
MAX912CSE Features
Complementary, TTL output capability
with Latch IC
Employing 2 elements
Operates under 0°C~70°C
Quiescent Current: 10mA
Voltage Gain: 70.88dB
MAX912CSE Applications
There are a lot of Maxim Integrated MAX912CSE linear comparators applications.
- Power management
- Infotainment & cluster
- General-Purpose, Low-Voltage Applications
- Mobile Phones and Tablets
- Self-diagnostics
- Mobile Communications
- Wireless Base Stations
- Set Top Boxes
- RC Timers
- Wide Range VCO; MOS Clock Timers
