MAX912EPE+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 727mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX912 |
| Pin Count | 16 |
| Output Type | Complementary, TTL |
| Number of Elements | 2 |
| Power Supplies | 5/+-5V |
| Nominal Supply Current | 10mA |
| Output Current | 20mA |
| Max Supply Current | 10mA |
| Propagation Delay | 14 ns |
| Quiescent Current | 10mA |
| Response Time | 10 ns |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V |
| Input Offset Voltage (Vos) | 2mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 70.88dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 5μA |
| Input Bias Current | 8μA |
| Neg Supply Voltage-Max (Vsup) | -7V |
| Voltage - Input Offset (Max) | 2mV @ ±5V |
| Current - Input Bias (Max) | 5μA @ ±5V |
| CMRR, PSRR (Typ) | 110dB CMRR, 100dB PSRR |
| Length | 19.175mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX912EPE+ Overview
To facilitate transportation, it comes packaged in 16-DIP (0.300, 7.62mm) .The comparator has a Complementary, TTL output.Ready for shipping in Tube package.The device is designed with 16 terminations.The electrical component here belongs to the Comparator family.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.In general, the chip type can be classified as with Latch .The total number of elements is 2 .Electronic comparator has 16 pins.The recommended mounting method is Through Hole .To ensure proper functioning, the operating temperature should be set to -40°C~85°C .Electronic comparator has 16 pins.You can search MAX912 if you are looking for more pin-to-pin solutions.The comparator displays a quiescent current of 10mA .A Through Hole is provided for mounting it onto a PCB or another board.The nominal supply current of the device should be 10mA for normal use.If the current supply exceeds 10mA , the comparator might be damaged.The device can be powered by 5/+-5V power supplies.Input current to the device cannot exceed 5μA .From the voltage formula, the voltage gain of the part is 70.88dB .
MAX912EPE+ Features
Complementary, TTL output capability
with Latch IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 10mA
Voltage Gain: 70.88dB
MAX912EPE+ Applications
There are a lot of Maxim Integrated MAX912EPE+ linear comparators applications.
- Threshold Detectors
- Analog front end
- Infotainment & cluster
- Alarm and Monitoring Circuits
- Automotive
- Mobile Communications
- RC Timers
- Multivibrators and High-Voltage Digital Logic Gates
- Security Detection Systems
- General Purpose Low Voltage Applications
