MAX912ESE-T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX912 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Output Type | Complementary, TTL |
| Number of Elements | 2 |
| Power Supplies | 5/+-5V |
| Supply Current-Max | 10mA |
| Response Time | 10 ns |
| Voltage - Supply, Single/Dual (±) | 5V~10V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Average Bias Current-Max (IIB) | 8μA |
| Supply Voltage Limit-Max | 7V |
| Neg Supply Voltage-Max (Vsup) | -7V |
| Current - Quiescent (Max) | 10mA |
| Voltage - Input Offset (Max) | 2mV @ ±5V |
| Current - Input Bias (Max) | 5μA @ ±5V |
| CMRR, PSRR (Typ) | 110dB CMRR, 100dB PSRR |
| Current - Output (Typ) | 20mA |
| Propagation Delay (Max) | 14ns |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
MAX912ESE-T Overview
A convenient packaging is provided in the form of 16-SOIC (0.154, 3.90mm Width) .The comparator has an output type of Complementary, TTL .The part is shipped by Tape & Reel (TR) .You can find 16 terminals of the comparator.The component belongs to the Comparator family of electrical components.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.The type of the chip can be classified as with Latch .Electronic comparator has a total of 2 elements.Electronic comparator includes 16 pins.A Surface Mount mounting type is recommended.Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.Try search MAX912 to get more pin-to-pin solutions for your special needs.In order to run the device, there are only 5/+-5V power supplies required.Providing a minimum current of 10mA is possible for this part.
MAX912ESE-T Features
Complementary, TTL output capability
with Latch IC
Employing 2 elements
Operates under -40°C~85°C
MAX912ESE-T Applications
There are a lot of Maxim Integrated MAX912ESE-T linear comparators applications.
- Laptop Computers
- Factory automation & control
- Simple Analog-to-Digital Converters (ADCs)
- Hand-Held Electronics
- Automotive
- Portable Battery Monitoring
- Wide Range VCO; MOS Clock Timers
- Power management
- RC Timers
- Battery-Powered Electronics
