MAX913CPA+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 727mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | MAX913 |
| Pin Count | 8 |
| Output Type | Complementary, TTL |
| Power Supplies | 5/+-5V |
| Number of Circuits | 1 |
| Nominal Supply Current | 10mA |
| Output Current | 20mA |
| Max Supply Current | 10mA |
| Propagation Delay | 14 ns |
| Quiescent Current | 10mA |
| Turn On Delay Time | 16 ns |
| Response Time | 10 ns |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V |
| Input Offset Voltage (Vos) | 2mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 70.88dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 5μA |
| Input Bias Current | 5μA |
| Neg Supply Voltage-Max (Vsup) | -7V |
| Voltage - Input Offset (Max) | 2mV @ ±5V |
| Current - Input Bias (Max) | 5μA @ ±5V |
| CMRR, PSRR (Typ) | 110dB CMRR, 100dB PSRR |
| Current - Output (Typ) | 20mA |
| Height Seated (Max) | 4.572mm |
| Length | 9.375mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX913CPA+ Overview
A convenient packaging is provided in the form of 8-DIP (0.300, 7.62mm) .The comparator has a Complementary, TTL output.The part will be shipped by Tube .As you can see, the comparator has8 terminals.The component belongs to the Comparator family of electrical components.In the presence of a 5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.The type of the chip can be classified as with Latch .The device is equipped with 8 pins.The type of mounting recommended is Through Hole .Electronic comparator is recommended that the operating temperature be set to 0°C~70°C to prevent malfunctions.8 pins are available on the comparator.You may wish to search MAX913 for more solutions that address your specific needs.There is 10mA current flowing in this comparator.Mounting on PCBs or other boards is easy with the Through Hole .Normal operation of the device requires a nominal supply current of 10mA .An excess of current supply over 10mA could result in malfunction of the comparator.Electronic comparator is sufficient to run the device wElectronic comparatorh 5/+-5V power supplies.Electronic comparator is possible to input a maximum current of 5μA into the device.In accordance with the voltage formula, the part's voltage gain is 70.88dB .
MAX913CPA+ Features
Complementary, TTL output capability
with Latch IC
Operates under 0°C~70°C
Quiescent Current: 10mA
Voltage Gain: 70.88dB
MAX913CPA+ Applications
There are a lot of Maxim Integrated MAX913CPA+ linear comparators applications.
- Portable and Battery-Powered Systems
- Battery management and protection
- Power management
- Factory automation & control
- General Purpose Low Voltage Applications
- System control and monitoring
- Body Control Modules
- Mobile Phones and Tablets
- Automatic Test Equipment
- High-Speed Differential Line Receiver
