MAX913ESA+T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Max Power Dissipation | 471mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX913 |
| Pin Count | 8 |
| Output Type | Complementary, TTL |
| Number of Elements | 1 |
| Power Supplies | 5/+-5V |
| Nominal Supply Current | 10mA |
| Output Current | 20mA |
| Max Supply Current | 10mA |
| Propagation Delay | 14 ns |
| Quiescent Current | 10mA |
| Response Time | 10 ns |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V |
| Input Offset Voltage (Vos) | 2mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 70.88dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 5μA |
| Input Bias Current | 5μA |
| Neg Supply Voltage-Max (Vsup) | -7V |
| Voltage - Input Offset (Max) | 2mV @ ±5V |
| Current - Input Bias (Max) | 5μA @ ±5V |
| CMRR, PSRR (Typ) | 110dB CMRR, 100dB PSRR |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
MAX913ESA+T Overview
Electronic comparator is packaged in 8-SOIC (0.154, 3.90mm Width) for convenient transportation.A comparator with an output type of Complementary, TTL is being used.As a result, it is designed with Tape & Reel (TR) package.The comparator has a total of 8 terminals.The component belongs to the Comparator family of electrical components.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .Speaking of types, this is a typical with Latch comparator.This element consists of 1 elements in total.Electronic comparator has 8 pins.The type of mounting recommended is Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .The comparator is equipped with 8 pins.You may wish to search MAX913 for more solutions that address your specific needs.In this comparator, the quiescent current is 10mA .There is a Surface Mount for mounting it on a PCB or other board.Electronic comparator is recommended that the nominal supply current be 10mA in order to use the device normally.A supply current exceeding 10mA may result in the comparator malfunctioning.5/+-5V power supplies are enough to run the device.Electronic comparator is possible to input a maximum of 5μA current into the device.A voltage gain of 70.88dB can be determined from the voltage formula for the part.
MAX913ESA+T Features
Complementary, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 10mA
Voltage Gain: 70.88dB
MAX913ESA+T Applications
There are a lot of Maxim Integrated MAX913ESA+T linear comparators applications.
- Mobile Phones and Tablets
- Simple Analog-to-Digital Converters (ADCs)
- Automatic Test Equipment
- General-Purpose, Low-Voltage Applications
- General-Purpose Portable Devices
- Power Supervision
- Wireless Base Stations
- High-Speed Differential Line Receiver
- Motor drives
- Portable Battery Monitoring
