MAX913EUA-T
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | MAX913 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Output Type | Complementary, TTL |
| Number of Elements | 1 |
| Power Supplies | 5/+-5V |
| Response Time | 10 ns |
| Voltage - Supply, Single/Dual (±) | 5V~10V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Average Bias Current-Max (IIB) | 8μA |
| Supply Voltage Limit-Max | 7V |
| Neg Supply Voltage-Max (Vsup) | -7V |
| Current - Quiescent (Max) | 10mA |
| Voltage - Input Offset (Max) | 2mV @ ±5V |
| Current - Input Bias (Max) | 5μA @ ±5V |
| CMRR, PSRR (Typ) | 110dB CMRR, 100dB PSRR |
| Current - Output (Typ) | 20mA |
| Propagation Delay (Max) | 14ns |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
MAX913EUA-T Overview
A convenient packaging is provided in the form of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .Output type of this comparator is Complementary, TTL .As a result, it is designed with Tape & Reel (TR) package.You can find 8 terminals of the comparator.The component belongs to the Comparator family of electrical components.A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.Electronic comparator can be classified as a with Latch chip.Electronic comparator has a total of 1 elements.The pinout of the component starts from 8 pins it has.Surface Mount universial mout for easy adapting.Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.You can find more pin-to-pin solutions for your special requirements by searching MAX913 .There is sufficient power to run the device from 5/+-5V power supplies.
MAX913EUA-T Features
Complementary, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
MAX913EUA-T Applications
There are a lot of Maxim Integrated MAX913EUA-T linear comparators applications.
- Building automation
- Motor drives
- General Purpose Low Voltage Applications
- Factory automation & control
- Portable and Battery-Powered Systems
- High-Speed Sampling Circuits
- Hand-Held Electronics
- Infotainment and Clusters
- Power Supervision
- Wide Range VCO; MOS Clock Timers
