MAX913EUA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparators |
| Max Power Dissipation | 362mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX913 |
| Pin Count | 8 |
| Output Type | Complementary, TTL |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Nominal Supply Current | 10mA |
| Output Current | 20mA |
| Max Supply Current | 10mA |
| Propagation Delay | 14 ns |
| Quiescent Current | 10mA |
| Response Time | 10 ns |
| Common Mode Rejection Ratio | 100 dB |
| Voltage - Supply, Single/Dual (±) | 5V~10V |
| Input Offset Voltage (Vos) | 2mV |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Voltage Gain | 70.88dB |
| Power Supply Rejection Ratio (PSRR) | 100dB |
| Supply Voltage Limit-Max | 7V |
| Max Input Current | 5μA |
| Input Bias Current | 5μA |
| Voltage - Input Offset (Max) | 2mV @ ±5V |
| Current - Input Bias (Max) | 5μA @ ±5V |
| CMRR, PSRR (Typ) | 110dB CMRR, 100dB PSRR |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX913EUA+T Overview
The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) in order to facilitate transportation.There is a comparator of type Complementary, TTL output on this device.This device is designed in Tape & Reel (TR) case.The comparator has 8 terminals.The electrical component in this case belongs to the Comparators families.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.In terms of type, this is a typical with Latch comparator.Electronic comparator has a total of 1 elements.The board includes 8 pins.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.8 pins are available on the comparator.You can find more pin-to-pin solutions for your special requirements by searching MAX913 .There is a quiescent current of 10mA in this comparator.Electronic comparator has a Surface Mount for mounting on PCB or other boards.Electronic comparator is recommended that the nominal supply current for the device be set to 10mA .Current supply exceeding 10mA could cause disfunction of the compartator.Electronic comparator is possible to input a maximum current of 5μA into the device.Based on the voltage formula, the voltage gain of the part is 70.88dB .A normal operation requires a voltage of 5V .
MAX913EUA+T Features
Complementary, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 10mA
Voltage Gain: 70.88dB
MAX913EUA+T Applications
There are a lot of Maxim Integrated MAX913EUA+T linear comparators applications.
- Threshold Detectors
- Window Comparators
- General Purpose Low Voltage Applications
- Metering Systems
- DC/DC and AC/DC power supplies
- Ultra-Low Power Systems
- Notebooks and PDAs
- Automatic Test Equipment
- Portable and Battery-Powered Systems
- Window Comparators
