MAX9140EUK-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Comparator |
| Max Power Dissipation | 571mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9140 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, TTL |
| Number of Elements | 1 |
| Nominal Supply Current | 300μA |
| Max Supply Current | 300μA |
| Propagation Delay | 40 ns |
| Quiescent Current | 300μA |
| Common Mode Rejection Ratio | 81.94 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 2mV |
| Average Bias Current-Max (IIB) | 0.32μA |
| Power Supply Rejection Ratio (PSRR) | 81.94dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 320nA |
| Input Bias Current | 320nA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.32μA @ 5V |
| Hysteresis | 1.5mV |
| CMRR, PSRR (Typ) | 81.94dB CMRR, 81.94dB PSRR |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.75mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MAX9140EUK-T Overview
For convenience, it is packaged in SC-74A, SOT-753 .This comparator is of the CMOS, Push-Pull, TTL output type.The part is shipped by Tape & Reel (TR) .The comparator has 5 terminals.The electrical component in this case belongs to the Comparator family.With a voltage of 5V supplied, the comparator is capable of performing a wide range of demanding tasks.When it comes to types, this comparator is a typical General Purpose .Currently, it consists of only 1 elements.The device includes 5 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .The comparator has 5 pins.Try search MAX9140 to get more pin-to-pin solutions for your special needs.A quiescent current of 300μA is observed in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.The nominal supply current of the device should be 300μA for normal use.Current supply exceeding 300μA could cause disfunction of the compartator.You can input a maximum current of 320nA into this device.
MAX9140EUK-T Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 300μA
MAX9140EUK-T Applications
There are a lot of Maxim Integrated MAX9140EUK-T linear comparators applications.
- Pulse, Squarewave, and Time Delay Generators
- Alarm and Monitoring Circuits
- Window Comparators
- Battery-Powered Electronics
- Body Control Modules
- Mobile Phones and Tablets
- Consumer Medical Electronics
- Set Top Boxes
- Mobile Phones
- Window Comparators
