MAX9140EXK+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 5-TSSOP, SC-70-5, SOT-353 |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 247mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9140 |
| Pin Count | 5 |
| Output Type | CMOS, Push-Pull, TTL |
| Number of Elements | 1 |
| Operating Supply Current | 300μA |
| Nominal Supply Current | 400μA |
| Max Supply Current | 400μA |
| Propagation Delay | 40 ns |
| Quiescent Current | 300μA |
| Common Mode Rejection Ratio | 81.94 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 4mA |
| Input Offset Voltage (Vos) | 2mV |
| Average Bias Current-Max (IIB) | 0.32μA |
| Power Supply Rejection Ratio (PSRR) | 81.94dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 320nA |
| Input Bias Current | 320nA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.32μA @ 5V |
| Hysteresis | 1.5mV |
| CMRR, PSRR (Typ) | 81.94dB CMRR, 81.94dB PSRR |
| Height | 1mm |
| Length | 2.2mm |
| Width | 1.35mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9140EXK+T Overview
To facilitate transportation, it comes packaged in 5-TSSOP, SC-70-5, SOT-353 .This comparator is of the CMOS, Push-Pull, TTL output type.As a result, it is designed with Tape & Reel (TR) package.5 terminals are found on the comparator.Other Comparators like the device play a important role in the industry.Electronic comparator is capable of performing numerous tasks when powered by 5V voltage.In terms of type, this is a typical General Purpose comparator.There are a total of 1 elements in it.Electronic comparator has 5 pins.In general, mounting type Surface Mount is recommended.If you want to avoid malfunction, you should set the operating temperature to -40°C~85°C .The comparator has a pin count of 5 .You can find more pin-to-pin solutions by searching MAX9140 .In this comparator, the quiescent current is 300μA .There is a Surface Mount on the board for mounting to a PCB or other board.Normally, the nominal supply current should be 400μA .Current supply exceeding 400μA could cause disfunction of the compartator.Electronic comparator is possible to input up to 320nA current into the device.
MAX9140EXK+T Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 300μA
MAX9140EXK+T Applications
There are a lot of Maxim Integrated MAX9140EXK+T linear comparators applications.
- Portable and Battery-Powered Systems
- Appliances
- Battery-Powered Electronics
- Consumer Medical Electronics
- Battery management and protection
- Zero-Crossing Detectors
- DC/DC and AC/DC power supplies
- Analog front end
- General-Purpose, Low-Voltage Applications
- Factory automation & control
