MAX9141EKA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Subcategory | Comparators |
| Max Power Dissipation | 470.6mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX9141 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, TTL |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 320μA |
| Max Supply Current | 320μA |
| Propagation Delay | 40 ns |
| Quiescent Current | 320μA |
| Common Mode Rejection Ratio | 81.94 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 2mV |
| Average Bias Current-Max (IIB) | 0.32μA |
| Power Supply Rejection Ratio (PSRR) | 81.94dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 320nA |
| Input Bias Current | 320nA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.32μA @ 5V |
| Hysteresis | 1.5mV |
| CMRR, PSRR (Typ) | 81.94dB CMRR, 81.94dB PSRR |
| Length | 2.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9141EKA+T Overview
A convenient packaging is provided in the form of SOT-23-8 .The comparator has a type CMOS, Push-Pull, TTL output.The chip is packaged with Tape & Reel (TR) .The comparator has a total of 8 terminals.The electrical component in this case belongs to the Comparators families.With a 5V voltage supply, the comparator can perform multiple demanding tasks.It's a typical with Latch comparator.There are a total of 1 elements in it.Electronic comparator includes 8 pins.Electronic comparator is recommended to mount using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .This comparator has 8 pins.You can search MAX9141 if you are looking for more pin-to-pin solutions.There is a quiescent current of 320μA in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Electronic comparator is recommended that the nominal supply current of the device be 320μA .An excess of current supply over 320μA could result in malfunction of the comparator.Electronic comparator is sufficient to run the device wElectronic comparatorh 3/5V power supplies.There is a maximum current that can be input into the device of 320nA .
MAX9141EKA+T Features
CMOS, Push-Pull, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 320μA
MAX9141EKA+T Applications
There are a lot of Maxim Integrated MAX9141EKA+T linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Metering Systems
- Body Control Modules
- Portable and Battery-Powered Systems
- Window Comparators, Multivibrators
- Security Detection Systems
- Simple Analog-to-Digital Converters (ADCs)
- Power Supervision
- Analog front end
- Zero-Crossing Detectors
