MAX9141ESA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | TIN |
| Subcategory | Comparators |
| Max Power Dissipation | 470.6mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | MAX9141 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, TTL |
| Number of Elements | 1 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 200μA |
| Max Supply Current | 200μA |
| Propagation Delay | 40 ns |
| Quiescent Current | 320μA |
| Common Mode Rejection Ratio | 81.94 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 2mV |
| Average Bias Current-Max (IIB) | 0.32μA |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 320nA |
| Input Bias Current | 320nA |
| Current - Quiescent (Max) | 320μA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.32μA @ 5V |
| Hysteresis | 1.5mV |
| CMRR, PSRR (Typ) | 81.94dB CMRR, 81.94dB PSRR |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9141ESA+T Overview
In order to facilitate transportation, it is packaged in 8-SOIC (0.154, 3.90mm Width) .Output type CMOS, Push-Pull, TTL is used for this comparator.This package has been designed with Tape & Reel (TR) .The comparator has 8 terminals.The component belongs to the Comparators family of electrical components.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.Speaking of types, this is a typical with Latch comparator.A total of 1 elements can be found in it.The board includes 8 pins.The recommended mounting method is Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.There are 8 pins on the comparator.Alternatively, you may search for MAX9141 to find more pin-to-pin solutions for your specific needs.There is a quiescent current of 320μA in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Normal operation of the device requires 200μA supply current.Current supply exceeding 200μA could cause disfunction of the compartator.The device can be run with 3/5V power supplies.Electronic comparator is possible to input up to 320nA current into the device.
MAX9141ESA+T Features
CMOS, Push-Pull, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 320μA
MAX9141ESA+T Applications
There are a lot of Maxim Integrated MAX9141ESA+T linear comparators applications.
- High-Speed Differential Line Receiver
- Metering Systems
- RC Timers
- Infotainment and Clusters
- General-Purpose, Low-Voltage Applications
- Mobile Communications
- Automotive
- Point of load regulators
- Multivibrators and High-Voltage Digital Logic Gates
- Window Comparators
