MAX9142EKA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 |
| Number of Pins | 8 |
| Weight | 40.001177mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 727mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX9142 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Operating Supply Current | 300μA |
| Nominal Supply Current | 330μA |
| Max Supply Current | 330μA |
| Propagation Delay | 40 ns |
| Quiescent Current | 300μA |
| Common Mode Rejection Ratio | 81.94 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Output Current per Channel | 4mA |
| Input Offset Voltage (Vos) | 2mV |
| Power Supply Rejection Ratio (PSRR) | 81.94dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 320nA |
| Input Bias Current | 320nA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.32μA @ 5V |
| Hysteresis | 1.5mV |
| CMRR, PSRR (Typ) | 81.94dB CMRR, 81.94dB PSRR |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.75mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9142EKA+T Overview
In order to make transportation easier, it is packaged in SOT-23-8 .The comparator has a CMOS, Push-Pull, TTL output.The part is shipped by Tape & Reel (TR) .There are 8 terminals on the comparator.Electronic comparator is a part of Comparators family.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.It's a typical General Purpose comparator.This is a 2 element comparator.Electronic comparator includes 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .In order to avoid malfunctions, the operating temperature should be set to -40°C~85°C .This comparator has 8 pins.Alternatively, you may search for MAX9142 to find more pin-to-pin solutions for your specific needs.There is 300μA current flowing in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current be 330μA in order to use the device normally.An excess of current supply over 330μA could result in malfunction of the comparator.A power supply of 3/5V is sufficient for the operation of the device.A maximum current of 320nA can be supplied to the device.
MAX9142EKA+T Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 300μA
MAX9142EKA+T Applications
There are a lot of Maxim Integrated MAX9142EKA+T linear comparators applications.
- Mobile Phones
- Wearable Devices
- Multivibrators and High-Voltage Digital Logic Gates
- Analog front end
- Infotainment & cluster
- Hand-Held Electronics
- General-Purpose, Low-Voltage Applications
- Mobile Phones and Tablets
- Ultra-Low Power Systems
- Set Top Boxes
