MAX9142ESA+
| Parameters | |
|---|---|
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX9142 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 300μA |
| Max Supply Current | 300μA |
| Propagation Delay | 40 ns |
| Quiescent Current | 300μA |
| Turn On Delay Time | 40 ns |
| Common Mode Rejection Ratio | 81.94 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 2mV |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 320nA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.32μA @ 5V |
| Hysteresis | 1.5mV |
| CMRR, PSRR (Typ) | 81.94dB CMRR, 81.94dB PSRR |
| Height | 1.3mm |
| Length | 3mm |
| Width | 1.75mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
MAX9142ESA+ Overview
To facilitate transportation, it comes packaged in 8-SOIC (0.154, 3.90mm Width) .There is a CMOS, Push-Pull, TTL output type for this comparator.We ship the part through Tube .The device is designed with 8 terminations.The component belongs to the Comparators family of electrical components.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.A comparator of this type is typically of type General Purpose .In total, it contains 2 elements.There are 8 pins on this board.The recommended mounting method is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.Electronic comparator has 8 pins.Alternatively, you may search for MAX9142 to find more pin-to-pin solutions for your specific needs.A quiescent current of 300μA is observed in this comparator.This component has a Surface Mount mount for mounting to PCBs or other boards.Electronic comparator is recommended that the nominal supply current be 300μA in order to use the device normally.If the current supply exceeds 300μA , the comparator could malfunction.The device can be powered by 3/5V power supplies.
MAX9142ESA+ Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 300μA
MAX9142ESA+ Applications
There are a lot of Maxim Integrated MAX9142ESA+ linear comparators applications.
- Mobile Phones and Tablets
- Metering Systems
- Current and voltage sensing
- Appliances
- Limit Comparators
- Alarm and Monitoring Circuits
- Handheld Instruments
- Power management
- Lithium ion battery monitoring
- Wearable Devices
