MAX9142ESA+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparators |
| Max Power Dissipation | 727mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Base Part Number | MAX9142 |
| Pin Count | 8 |
| Output Type | CMOS, Push-Pull, TTL |
| Number of Elements | 2 |
| Power Supplies | 3/5V |
| Nominal Supply Current | 330μA |
| Max Supply Current | 330μA |
| Propagation Delay | 40 ns |
| Quiescent Current | 300μA |
| Turn On Delay Time | 40 ns |
| Common Mode Rejection Ratio | 81.94 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 2mV |
| Power Supply Rejection Ratio (PSRR) | 81.94dB |
| Supply Voltage Limit-Max | 6V |
| Max Input Current | 320nA |
| Dual Supply Voltage | 5.5V |
| Input Bias Current | 320nA |
| Current - Quiescent (Max) | 300μA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.32μA @ 5V |
| Hysteresis | 1.5mV |
| CMRR, PSRR (Typ) | 81.94dB CMRR, 81.94dB PSRR |
| Height | 4mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9142ESA+T Overview
In order to make transportation easier, it is packaged in 8-SOIC (0.154, 3.90mm Width) .This comparator is of the CMOS, Push-Pull, TTL output type.This package has been designed with Tape & Reel (TR) .8 terminals are found on the comparator.Electronic comparator is a component of the Comparators family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.Speaking of types, this is a typical General Purpose comparator.Currently, it consists of only 2 elements.A total of 8 pins are included.Electronic comparator is recommended to mount using type Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.The comparator has a pin count of 8 .You can find more pin-to-pin solutions by searching MAX9142 .A quiescent current of 300μA is displayed by this comparator.The board has a Surface Mount for mounting on a PCB or any other board.Electronic comparator is recommended that the nominal supply current for the device be set to 330μA .A current supply greater than 330μA may cause the comparator to malfunction.The device can be powered by 3/5V power supplies.Electronic comparator is possible to input a maximum of 320nA current into the device.
MAX9142ESA+T Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 300μA
MAX9142ESA+T Applications
There are a lot of Maxim Integrated MAX9142ESA+T linear comparators applications.
- Mobile Phones and Tablets
- General-Purpose Portable Devices
- Consumer Medical Electronics
- Wireless Base Stations
- Body Control Modules
- Simple Analog-to-Digital Converters (ADCs)
- Battery management and protection
- Alarm and Monitoring Circuits
- Power Supervision
- DC/DC and AC/DC power supplies
