MAX9144ESD+
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparators |
| Max Power Dissipation | 666.7mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | MAX9144 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, TTL |
| Number of Elements | 4 |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Nominal Supply Current | 300μA |
| Max Supply Current | 300μA |
| Propagation Delay | 40 ns |
| Quiescent Current | 300μA |
| Turn On Delay Time | 40 ns |
| Common Mode Rejection Ratio | 81.94 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 2mV |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 320nA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.32μA @ 5V |
| Hysteresis | 1.5mV |
| CMRR, PSRR (Typ) | 81.94dB CMRR, 81.94dB PSRR |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9144ESD+ Overview
In order to facilitate transportation, it is packaged in 14-SOIC (0.154, 3.90mm Width) .Output type of this comparator is CMOS, Push-Pull, TTL .The part is shipped by Tube .There are14 terminals on the comparator.The electrical component in this case belongs to the Comparators families.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .In general, the chip type can be classified as General Purpose .The total number of elements is 4 .The device contains 14 pins.Electronic comparator is recommended to mount the device using type Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C in order to prevent malfunctions.14 pins are present on the comparator.In order to find a solution that meets your specific needs, search MAX9144 for more pin-to-pin solutions.There is a quiescent current of 300μA in this comparator.The PCB or other board has a Surface Mount for mounting.Normal operation of the device requires a nominal supply current of 300μA .If the current supply exceeds 300μA , the comparator might be damaged.The device can be powered by 3/5V power supplies.For the output quality to be maintained, 2 channels work together.
MAX9144ESD+ Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 300μA
MAX9144ESD+ Applications
There are a lot of Maxim Integrated MAX9144ESD+ linear comparators applications.
- Point of load regulators
- Notebooks and PDAs
- Current and voltage sensing
- Threshold Detectors
- Pulse, Squarewave, and Time Delay Generators
- Battery-Powered Electronics
- Consumer Medical Electronics
- Automatic Test Equipment
- Mobile Communications
- Set Top Boxes
