MAX9144ESD+T
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparators |
| Max Power Dissipation | 666.7mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | MAX9144 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, TTL |
| Number of Elements | 4 |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Nominal Supply Current | 300μA |
| Max Supply Current | 300μA |
| Propagation Delay | 40 ns |
| Quiescent Current | 300μA |
| Turn On Delay Time | 40 ns |
| Common Mode Rejection Ratio | 81.94 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 2mV |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 320nA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.32μA @ 5V |
| Hysteresis | 1.5mV |
| CMRR, PSRR (Typ) | 81.94dB CMRR, 81.94dB PSRR |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MAX9144ESD+T Overview
A convenient packaging is provided in the form of 14-SOIC (0.154, 3.90mm Width) .The comparator has a type CMOS, Push-Pull, TTL output.The part is shipped by Tape & Reel (TR) .The device is designed with 14 terminations.The electrical component here belongs to the Comparators family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .Electronic comparator can be classified as a General Purpose chip.The total number of elements is 4 .Electronic comparator has 14 pins.The recommended mounting method is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.14 pins are available on the comparator.You can find more pin-to-pin solutions by searching MAX9144 .A quiescent current of 300μA is observed in this comparator.Mounting on PCBs or other boards is easy with the Surface Mount .Normal operation of the device requires a nominal supply current of 300μA .A supply current exceeding 300μA may result in the comparator malfunctioning.In order to run the device, there are only 3/5V power supplies required.To ensure a high level of output quality, 2 channels work together.
MAX9144ESD+T Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 300μA
MAX9144ESD+T Applications
There are a lot of Maxim Integrated MAX9144ESD+T linear comparators applications.
- Window Comparators, Multivibrators
- Pulse, Squarewave, and Time Delay Generators
- Motor drives
- Laptop Computers
- Battery-Powered Electronics
- Multivibrators and High-Voltage Digital Logic Gates
- Limit Comparators
- Threshold Detectors
- Zero-Crossing Detectors
- Alarm and Monitoring Circuits
