MAX9144EUD+
| Parameters | |
|---|---|
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Subcategory | Comparators |
| Max Power Dissipation | 727mW |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX9144 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, TTL |
| Number of Elements | 4 |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Nominal Supply Current | 300μA |
| Max Supply Current | 300μA |
| Propagation Delay | 40 ns |
| Quiescent Current | 300μA |
| Turn On Delay Time | 40 ns |
| Common Mode Rejection Ratio | 81.94 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 2mV |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 320nA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.32μA @ 5V |
| Hysteresis | 1.5mV |
| CMRR, PSRR (Typ) | 81.94dB CMRR, 81.94dB PSRR |
| Height | 950μm |
| Length | 5.1mm |
MAX9144EUD+ Overview
A convenient transport package is provided in 14-TSSOP (0.173, 4.40mm Width) .Output type CMOS, Push-Pull, TTL is used for this comparator.This package has been designed with Tube .The comparator has a total of 14 terminals.The component belongs to the Comparators family of electrical components.When supplied with 5V voltage, the comparator is capable of performing a wide range of tasks.The type of the chip can be classified as General Purpose .There are a total of 4 elements in it.The board includes 14 pins.The recommended mounting type is Surface Mount .Electronic comparator is recommended that the operating temperature be set to -40°C~85°C to prevent malfunctions.14 pins are available on the comparator.If you require more pin-to-pin solutions, search MAX9144 for more options.The comparator presents a quiescent current of 300μA volts.The PCB or other board can be mounted using the Surface Mount on it.Normal use of the device should require a nominal supply current of 300μA .An excess of current supply over 300μA could result in malfunction of the comparator.The device can be powered by 3/5V power supplies.To maintain output quality, 2 channels cooperate.
MAX9144EUD+ Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 300μA
MAX9144EUD+ Applications
There are a lot of Maxim Integrated MAX9144EUD+ linear comparators applications.
- Zero-Crossing Detectors
- Body Control Modules
- Consumer Medical Electronics
- Appliances
- Security Detection Systems
- Multivibrators and High-Voltage Digital Logic Gates
- Motor drives
- Notebooks and PDAs
- Window Comparators
- Current and voltage sensing
