MAX9144EUD-T
| Parameters | |
|---|---|
| Hysteresis | 1.5mV |
| CMRR, PSRR (Typ) | 81.94dB CMRR, 81.94dB PSRR |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | TIN LEAD |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | MAX9144 |
| Pin Count | 14 |
| Output Type | CMOS, Push-Pull, TTL |
| Number of Elements | 4 |
| Power Supplies | 3/5V |
| Number of Channels | 2 |
| Nominal Supply Current | 300μA |
| Max Supply Current | 300μA |
| Propagation Delay | 40 ns |
| Quiescent Current | 300μA |
| Turn On Delay Time | 40 ns |
| Common Mode Rejection Ratio | 81.94 dB |
| Voltage - Supply, Single/Dual (±) | 2.7V~5.5V |
| Input Offset Voltage (Vos) | 2mV |
| Supply Voltage Limit-Max | 6V |
| Input Bias Current | 320nA |
| Voltage - Input Offset (Max) | 2mV @ 5V |
| Current - Input Bias (Max) | 0.32μA @ 5V |
MAX9144EUD-T Overview
In order to facilitate transportation, it is packaged in 14-TSSOP (0.173, 4.40mm Width) .The comparator has an output type of CMOS, Push-Pull, TTL .Electronic comparator is shipped by Tape & Reel (TR) .The comparator has a total of 14 terminals.The chip belongs to Comparator .A comparator is capable of completing a variety of demanding tasks when supplied with 5V voltage.This is a typical comparator of type General Purpose .Currently, it consists of only 4 elements.The pinout of the component starts from 14 pins it has.Electronic comparator is recommended that the mounting type be Surface Mount .As a precaution, it is recommended to set the operating temperature to -40°C~85°C to prevent malfunctions.14 pins are present on the comparator.You can find more pin-to-pin solutions for your special requirements by searching MAX9144 .In this comparator, the quiescent current is 300μA .The PCB or other board can be mounted using the Surface Mount on it.The nominal supply current of the device should be 300μA for normal use.An excess of current supply over 300μA could result in malfunction of the comparator.In order to operate the device, 3/5V power supplies are sufficient.As a result, 2 channels work together to maintain the quality of the output.
MAX9144EUD-T Features
CMOS, Push-Pull, TTL output capability
General Purpose IC
Employing 4 elements
Operates under -40°C~85°C
Quiescent Current: 300μA
MAX9144EUD-T Applications
There are a lot of Maxim Integrated MAX9144EUD-T linear comparators applications.
- System control and monitoring
- Security Detection Systems
- General Purpose Low Voltage Applications
- Portable and Battery-Powered Systems
- Mobile Phones and Tablets
- High-Speed Sampling Circuits
- High-Speed Differential Line Receiver
- Appliances
- Zero-Crossing Detectors
- General-Purpose Portable Devices
